577182
18
Verklein
Vergroot
Pagina terug
1/98
Pagina verder
09/ 2013
BENNING CM 6
12
7.6 PEAK HOLD
Measuring ranges: V AC, A AC
Coupling type: AC
In the PEAK-HOLD function (peak value storage) an additional error needs to
be taken into account for the specified precision.
+ (± 3% + 10 digits)
Measurement values: > 750 V
Peak
or 800 A
Peak
are not specified
8. Making measurements with the BENNING CM 6
8.1 Preparations for making measurements
Operate and store the BENNING CM 6 only at the specified storage and operat-
ing temperatures conditions. Avoid continuous insulation.
- Check rated voltage and rated current details specified on the safety meas-
uring lines. The nominal voltage and current ratings of the safety measuring
cables included in the scope of delivery correspond to the ratings of the
BENNING CM 6.
- Check the insulation of the safety measuring cables. Discard the safety
measuring cables immediately if the insulation is damaged.
- Check safety measuring lines for continuity. If the conductor in the safety measuring
line is interrupted, the safety measuring line must be quarantined immediately.
- Before - at the rotary switch a different function is selected, the safety
measuring lines must be disconnected from the measuring point.
- Strong sources of interference in the vicinity of the BENNING CM 6 can lead
to unstable readings and measuring errors.
8.2 Voltage measuring
Do not exceed the maximum permitted voltage with respect to
earth potential! Electrical danger!
The highest voltage which may be applied to the jacks,
- COM socket
- jack for V, Ω
of the BENNING CM 6 against ground, amounts to 1000 V.
- Use the rotary switch to select the required function (V AC) or (V DC) on
the BENNING CM 6.
- The black safety measuring cable has to be contacted with the COM jack
on the BENNING CM 6.
- The red safety measuring cable has to be connected to the jack for V,
on the BENNING CM 6.
- Bring the safety measuring lines into contact with the measuring points,
read off measured value on the digital display on the BENNING CM 6.
See figure 2: Direct voltage measurement
See figure 3: Alternating voltage measurement
8.3 Alternating current measurement
8.3.1 Preparations for making measurements
Operate and store the BENNING CM 6 only at the specified storage and operat-
ing temperatures conditions. Avoid continuous insulation.
- Strong sources of interference in the vicinity of the BENNING CM 6 can lead
to unstable readings and measuring errors.
Do not apply any voltage to the output contacts of the
BENNING CM 6! Any possibly connected safety measuring
cables have to be removed.
8.3.2 Alternating current measurement
- Use the rotary switch to select the required function (A AC) on the
BENNING CM 6.
- Operate opening lever clamp single wire live conductor centrally by
means of the BENNING CM 6 pliers.
- Read off the digital display unit .
See figure 4: Alternating current measurement
8.4 Resistance measuring and acoustic continuity testing
- Use the rotary switch to select the required function ( ) on the
BENNING CM 6.
- The black safety measuring cable has to be contacted with the COM jack
on the BENNING CM 6. The red safety measuring cable has to be con-
nected to the jack for V, Ω on the BENNING CM 6.
- Bring the safety measuring lines into contact with the measuring points,
read off measured value on the digital display on the BENNING CM 6.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Benning CM6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Benning CM6 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Turks, Zweeds als bijlage per email.

De handleiding is 5,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info