577176
18
Verklein
Vergroot
Pagina terug
1/98
Pagina verder
09/ 2013
BENNING CM 1-3
12
7. Electrical specifications
Note: The measuring accuracy is specified as the sum of:
- a relative part of the measured value and
- a number of digits (i.e. counting steps of the last digit).
This measuring accuracy applies to temperatures from 23 °C ± 5 °C and a rela-
tive air humidity lower than 80 %.
7.1 AC voltage ranges
The input resistance is 2 MΩ in parallel 100 pF. The measurement reading is
obtained by rectification of average reading and displayed as actual value.
Measuring range Resolution Measurement accuracy Overload protection
200 V 0.1 V
± (1.5 %
of reading + 5 digits)
in frequency range 50 Hz - 500 Hz
750 V
eff
1000
DC voltage
750 V 1 V
± (1.5 %
of reading + 5 digits)
in frequency range 50 Hz - 500 Hz
750 V
eff
1000
DC voltage
7.2 DC voltage ranges
The input resistance is 2 MΩ.
Measuring range Resolution Measurement accuracy Overload protection
200 V 0.1 V ± (1.0 %
of reading + 2 digits)
750 V
eff
1000
DC voltage
1000 V 1 V ± (1.0 %
of reading + 2 digits)
750 V
eff
1000
DC voltage
7.3 AC current ranges
(Current-fork opening embraces AC wire).
Measuring range Resolution Measurement accuracy Overload protection
200 A 0.1 A
± (3.0 % of the measured value + 3 digits)
within the frequency range 50 Hz – 60 Hz
400 A
Additional error in parallel current-conducting wire: < 0.08 A/ A.
7.4 Resistance measuring ranges
Overload protection for resistance measurements: 600 V
eff
Measuring
range
Resolution Measuring accuracy
Max. open-circuit
voltage
200 Ω 0.1 Ω
±
(1.0 % of the measured value+ 5 digits) 1.3 V
2 kΩ 1
±
(1.0 % of the measured value + 2 digits) 1.3 V
20 kΩ 10 Ω
±
(1.0 % of the measured value + 2 digits) 1.3 V
200 kΩ 100 Ω
±
(1.0 % of the measured value + 2 digits) 1.3 V
2 MΩ 1 kΩ
±
(1.0 % of the measured value + 2 digits) 1.3 V
20 MΩ 10 kΩ
±
(1.9 % of the measured value + 5 digits) 1.3 V
7.5 Diode and continuity test
The stated measuring accuracy applies to a range between 0.4 V and 0.8 V.
Overload protection: 600 V
eff
The integrated buzzer sounds at a resistance R lower than 50 Ω.
Measuring
range
Resolution Measuring accuracy
Max. measuring
current
Max.
open-circuit
voltage
1 mV
± (1.5 % of the measured value +
0.05 V)
1.5 mA 3.0 V
8. Measuring with the BENNING CM 1-3
8.1 Preparing the measurement
Operate and store the BENNING CM 1-3 at the specified storage and operating
temperatures only! Do not permanently expose the device to sunlight.
- Check stated nominal voltage and nominal current on the safety measuring
leads. Nominal voltage and current of the enclosed safety measuring leads
comply with the respective values of the BENNING CM 1-3.
- Check insulation of the safety measuring leads. If the insulation is
damaged, the safety measuring leads must be replaced immediately.
- Check the safety measuring leads for continuity. If the conductor in the
safety measuring lead is interrupted, replace the safety measuring leads
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Benning CM1.3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Benning CM1.3 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Turks, Zweeds als bijlage per email.

De handleiding is 5,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info