214230
33
Verklein
Vergroot
Pagina terug
1/35
Pagina verder
33 Additional Information
Troubleshooting
Problem Cause Remedy
The projector does
not turn on.
There is no power from the power
cable.
Plug the power cord into the AC inlet on the
rear of the projector, and plug the power
cord into to the power outlet. If the power
outlet has a switch, make sure that it is
switched on.
The power switch is not in the on
position.
Put the power switch in the on position.
Attempting to turn the projector on
again during the cooling process.
Wait until the cooling down process has
completed.
The front lamp cover is not securely
attached.
Correctly attach the front lamp cover.
No picture.
The video source is not turned on or
connected correctly.
Turn the video source on and check that the
signal cable is connected correctly.
The projector is not correctly
connected to the input source
device.
Check the connection.
The input signal has not been
correctly selected.
Select the correct input signal with the
INPUT keys: Component 1, Component 2,
DVI-D, DVI-A, Video and S-Video on the
remote control.
The input signal has not been
correctly selected in the "INPUT
SOURCE" item in the DISPLAY
menu.
Select the correct input signal.
POWER light or LAMP indicator
light flashing.
Please contact your BenQ dealer for
assistance.
Image is unstable.
The connection cables are not
securely connected to the projector
or the signal source.
Correctly connect the cables to the
appropriate terminals.
Picture is blurred.
The projection lens is not correctly
focused.
Adjust the focus of the lens using the focus
ring.
The projector and the screen are not
aligned properly.
Adjust the projection angle and direction as
well as the height of this unit if necessary.
The lens cap is still attached to the
lens
Remove the lens cap.
Remote control does
not work correctly
The batteries are out of power. Replace both of the batteries with new ones.
LAMP light flashes
red.
The front lamp cover is not correctly
attached.
Correctly attach the front lamp cover.
The cooling fan is not working
properly.
Please contact your BenQ dealer for
assistance.
The temperature inside the projector
is extremely high.
Check that the ventilation holes are not
blocked.
The ambient temperature is too high
(above 35°C / 95°F).
Wait until the room cools down or move the
projector to a cooler loaction.
POWER indicator
light flashes orange
and green
sequentially.
The lamp has exceeded its specified
usage time.
Replace the lamp with a new one.
The lamp has burned out. Replace the lamp with a new one.
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BenQ pe 7800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BenQ pe 7800 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info