33
BATTERY CHARGING
Make sure the battery is charged
before using the device. Use the
supplied magnetic cable for
charging. A 5V, 1A power adapter is
recommended. It takes
approximately 2 hours to fully
charge the device. To connect
charging, follow the steps below.
1. Place the charging cable
connector under the device so that
its pins are in contact with the
metal points in the terminal.
2. The magnets will hold the connector in place
3.Using the USB connector, connect the charging cable to a
power source.
4. If everything is correct, the loading graphic will be displayed
on the screen.
Note: if the device was completely discharged, the loading
graphics may be displayed after a few minutes.
APPLICATION (APP) INSTALLATION AND PAIRING WITH DEVICE
The product is compatible with smartphones with Android 4.4 or
later and iOS8.4 or later, with Bluetooth from version 4.0. It is
operated by the "QWatch Pro" application (hereinafter referred
to as APP or APP), which is available in the App Store or Google
Play Store. Make sure your smartphone is set to "Visible to all
nearby Bluetooth devices" when pairing. Your phone should be
connected to the Internet during Pairing.
Pairing the device with the phone via APP:
1.Activate Bluetooth on your phone
2.Open the app and click "Device" at the bottom of the screen
3.Then click "Add Device" at the top of the screen
4.Wait while the application searches for the device