747145
4
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
59
58
APP
Appendix
Connection
Normally when you use Bellman Audio Maxi digital communication aid, you place it on a
table, hold it in your hand, hang it round your neck using a neck strap (accessory) or attach it to
an article of clothing with the clip supplied (18).
You can connect BE9122 Bellman Audio Headphones, BE9159/BE9161 Bellman Audio Neck
Loop, BE9403 Bellman Audio Stetoclips, BE9124 Bellman Audio Ear Phones or another
product recommended by Bellman & Symfon to the Headphone Output (12).
You can connect a BE9126 Bellman Audio Cable Kit to the External Sound Source Input (1),
which you can connect to the required sound source or a BE9127 Bellman Audio External
Microphone. It has a 5 metre long cable so that it can, for example, be positioned next to the TV
or someone who is speaking.
Press on the On/O button h (5) to start Maxi. While Maxi is starting up, the Microphone
LED (3) and the Telecoil LED (4) blinks. When the Microphone LED (3) comes on, Maxi is
ready to use and you will hear sound from the internal microphone in the headphones.
Settings
Bellman Audio Maxi has more setting options than those found on the front. You can adjust and
adapt Maxi to your individual requirements using the Setting button (15).
Balance
The balance between the right and left channels can be set, e.g. for headphones. This setting
can be used to compensate for a hearing loss in one ear.
The standard setting is centred balance.
All settings are carried out in sequence, see below under Adjusting settings.
Basic attenuation
The basic attenuation can be set, for example, for dierent headphones. What you actually set is
the attenuation you require at the maximum power output you want to have (which is therefore
0 dB attenuation). This setting is useful when you want to adjust the maximum volume for a
pair of headphones or in-ear phones with a higher sensitivity than the BE9122 Bellman Audio
Headphones.
The standard setting is 0 dB attenuation.
All settings are carried out in sequence, see below under Adjusting settings.
Blocking the T position
The Telecoil Selection Button can be blocked if you know that the T position will not be used.
This setting is for those who will never use the Telecoil and want to avoid selecting this position
by mistake.
The standard setting is for blocking of the T position not to be activated.
All settings are carried out in sequence, see below under Adjusting settings.
+
+
_
_
Adjusting settings
It is easy to adjust settings.
Open the battery cover (17) by
pressing the battery cover lock
(16) in the direction of the arrow.
Press the Setting button (15) for
about 5 seconds. It is easiest to
do this with a paper clip, see
gure. One of the LEDs in the
Volume and Tone LED Indicator (8)
now starts to blink
Adjust the balance between the right
and left channels using the volume
control bc (9). c moves the sound towards the right channel and b moves the sound towards
the left channel. The current setting is indicated by a ashing dot on the Volume and Tone LED
Indicator (8) which moves towards the right or left.
When the desired value has been set, give a short press on the Setting button (15) and Maxi will
move on to setting the maximum volume.
Adjust the maximum volume using the volume control bc (9). c increases the maximum
volume and b reduces the maximum volume. The current attenuation setting relative to the
maximum volume is displayed via the Volume and Tone LED Indicator (8). No attenuation is
shown by only one LED being visible at the right. The greater the attenuation the more LEDs
come on from right to left. Each increment and hence each lit LED corresponds to a reduc-
tion of 3 dB.
When the desired value has been set, give a short press on the Setting button (15) and Maxi
will move on to the setting for locking the T position.
Now set the use of the telecoil to locked or unlocked using the volume control bc (9). c
enables use of the telecoil and b blocks use of the telecoil. When the telecoil is activated, the
Telecoil LED (4) blinks and when the function is blocked the Telecoil LED (4) is o.
When the desired value has been set, there are three options:
o To start again: give a short press on the Setting button (15) and Maxi starts again with
setting the balance above.
o To save: press the Setting button (15) for about 5 seconds and Maxi saves the settings
that have been adjusted and returns to normal mode.
o To change your mind: press the On/O button h (5) and Maxi will disregard all the
settings that have been adjusted and return to normal mode.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bellman Symfon BE2020 - Maxi bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bellman Symfon BE2020 - Maxi in de taal/talen: Duits als bijlage per email.

De handleiding is 0,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bellman Symfon BE2020 - Maxi

Bellman Symfon BE2020 - Maxi Gebruiksaanwijzing - Nederlands, English - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info