747165
11
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
Troubleshooting
If Try this
The CO alarm beeps for no
apparent reason.
Follow the detailed instructions in What to do when the
alarm sounds section. If there are still problems:
Ensure there are no fuel burning appliances in the vicinity
which could be leaking CO gas (e.g. even from next door).
Ensure there are no fumes in the area (e.g. paint, thinners,
hair spray, chemical cleaners, aerosol sprays, damp proong
done with and aqueous emulsion such as amino functional
siloxane and alkylalkoxysilane.
Ensure there is no outdoor source of CO in the vicinity (e.g.
a car with engine running, heavy trac, heavy air pollution,
barbecue fumes etc.).
Ensure there is no source of hydrogen such as batteries being
charged (e.g. on boats or in Uninterruptable Power Supplies
(UPS)).
Ensure there is not excessive smoke or fumes from pipes,
especially those that use coal or charcoal.
Press the test/hush button to silence the alarm.
If the unit continues to sound it is possibly defective and
should be replaced.
The Visit receiver is triggered
for no apparent reason.
There is probably another Visit system nearby that triggers
yours. Change the radio key on all units, see Changing the
radio key.
Tamper proong the alarm
The alarm can be made resistant to unauthorized removal. Proceed as follows:
1 Break o the small pillar on the base.
2 To remove the alarm once installed, it is now necessary to use a small screwdriver, to release
the catch. Push the catch towards the ceiling and then twist o the alarm.
3 If necessary, it is possible to further secure or tamperproof the alarm by using a No.2 or
No.4 3/32" to 7/64" (2 to 3mm) diameter - not supplied self-tapping screw 1/4" to 5/16" (6 to
8mm) long to rmly lock the alarm and its mounting plate together.
1 2 3
19 20
If Try this
Nothing happens when I
press the CO alarm test/
hush button.
Check that the unit is secured correctly on the mounting plate.
Wait 15 s before testing again by pushing the test/hush button.
Check that the batteries are inserted correctly. Replace batteries.
Check the age of the alarm, see the “replace by label on the unit.
The CO alarm beeps when I
press the test/hush button,
but the receiver is not
responding.
Check the Visit receiver batteries and connections.
Move the receiver closer to the alarm to make sure it’s within range.
Check that the units are set to the same radio key, see
Changing the radio key.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bellman BE1210 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bellman BE1210 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info