648619
16
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
15 010508A-1
CALLER ID UNIT TROUBLESHOOTING TABLE
SYMPTOM SOLUTION
The Caller ID
LCD panel is
blank
Check the batteries for proper installation.
If the batteries are weak or dead, replace with new batteries
(alkaline batteries are recommended). Please refer to the
“Battery Installation” section of the users manual for more
details.
Check the connection of the AC adaptor.
The Caller ID
LCD panel does
not show the
callers name
and/or phone
number
The Caller ID unit will not function until you have Caller ID
service provided by your local phone company. Call your
local phone company to have Caller ID installed on your
telephone line.
Check your telephone line connections. Refer to the section
“INSTALLATION” of the manual for details.
If you picked up the phone before
the second ring, the caller
information will not
be correctly received. If you have a
telephone answering device (TAD) connected with the unit, set
the TAD to answer after two rings or more.
If it is a blocked call or an out-of-area call, the callers name
and/or phone number will not appear on the display. Please
refer to the “Receiving Caller ID Information” section of the
user’s manual for more details.
If only the callers phone number appears on the display, it
may
be a Single Data Message Format (SDMF) call, as opposed to a
Multiple Data Message Format (MDMF) call. Please refer to
the Glossary section of the users manual for definitions.
“LINE
ERROR”
On rare occasions, the Caller ID information sent by the
telephone company may have an error in the transmission.
This is not the fault of your Caller ID unit. It can only capture
and store the data that was received.
Cannot delete
call records in
memory
The DELETE button must be pressed twice briefly to delete a
single call record. To delete all call records, press and hold the
DELETE button for as least 5 seconds. Please refer to the
“ERASING A CALL/ALL CALLS” section of the manual for
more details.
No Data Sent
On rare occasions, Caller ID information sent by the telephone
company may be too weak to be detected by the Caller ID.
This is not the fault of the Caller ID unit; it can only capture
and store the digital data that was received.
This message also appears when the Callers local phone
company does not have Caller ID service available.
TELEPHONE UNIT TROUBLESHOOTING TABLE
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bell phones Big Button Plus 20270 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bell phones Big Button Plus 20270 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info