833556
8
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
6
STEP 3: Firmly place the wall plugs into the pilot holes so that they sit flush with the surface of the wall.
STEP 4: Position the wall mount storage base onto the surface, aligning the holes on the surface with those on
the wall mount storage base.
STEP 5: Insert the screws provided through the wall mount storage base and into the wall and tighten so that
the wall mount storage base sits flush with the surface. Check that the wall mount storage base has the hook
facing upwards.
STEP 6: Slide the vacuum cleaner into position on the wall mount storage base, making sure that it engages
with the hook.
NOTE: Check that the chosen surface is strong enough to support the wall mount storage
base and vacuum cleaner. Make sure that the wall mount is secured at an adequate height to
store the fully assembled vacuum cleaner.
CAUTION: Check that there are no electrical, plumbing or gas supplies situated beneath the
surface of the wall. These services normally run vertically or horizontally behind the wall, and
the electrical wiring will radiate from the socket, possibly in more than one direction. Testers
are available from reputable DIY stores. Consult a qualified professional if required.
Storage
Check that the vacuum cleaner is cool, clean and dry before storing in a cool, dry place.
Store the mains power adaptor separately, checking that it is not bent at the connections, as this could cause
damage to the wires.
Troubleshooting
Problem Possible cause Solution
The vacuum cleaner
will not charge.
The mains power
adaptor is not
securely connected.
Connect the mains power adaptor to the charging port on
the vacuum cleaner main unit, following the instructions in
the section entitled ‘Charging the vacuum cleaner’.
The suction is poor. The air inlet or
attachment is blocked.
Disconnect the attachment and clear the blockage.
The dust container is
almost full.
Empty the dust container following the instructions in the
section entitled ‘Emptying the dust container’.
The filter is blocked. Clean the filter following the instructions in the section
entitled ‘Cleaning the filter and filter cone’.
The brush bar is
not rotating.
The brush bar is
blocked due to built-up
hair, dust and debris.
Clean the floor brush following the instructions in the
section entitled ‘Cleaning the floor brush’.
Specifications
Product code: BEL01981
Battery: 22.2 V 2600 mAh Li-ion
Adaptor input: 100–240 V ~ 50/60 Hz, 0.4 A
Adaptor output: 27.0 V
0.5 A, 13.5 W
Average active eciency: 84.0%
Eciency at low load (10%): 77.0%
No load power consumption: 0.09 W
Dust tank capacity: 500 ml
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Beldray BEL01981 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Beldray BEL01981 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 0,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info