496327
9
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
9 XENYX 1202FX/1002FX User Manual
3. Applications
3.1 Recording studio
GAIN GAIN
HPS3000
TRUTH B2030A
Electric guitar
XENYX 1002FX
V-AMP 3
B-2 PRO
UMX490 MIDI sound module
CD Player
MD Recorder
Digital Audio
Workstation
Fig. 3.1: The 1002FX in a recording studio
Even though most of the tasks in a studio can nowadays be accomplished using
a computer, a mixing console remains an unavoidable piece of equipment that
lets you eectively manage audio inputs and outputs: microphone signals need
to be pre-amplied prior to being recorded, and the quality of microphone
sound is often worked on; recording and playback signals must be routed to the
appropriate connectors or integrated into the mix; the volume of headphones
and studio monitors needs to be adjusted, and so on. The extensively equipped
main section of the XENYX mixing consoles provides concrete benets to you.
Wiring:
Connect your sound sources to the microphone/line inputs of the mixing
console. Connect the master machine (DAT/minidisk recorder) to the
main outputs. Yourmonitor speakers are connected to the control room
outputs; theheadphones are connected to the headphone output.
Now,connect the CD/tape outputs to the sound card inputs on your DAW
(DigitalAudioWorkstation). Connect the outputs of the sound card in your
computer to the CD/tape inputs.
Recording and playback:
Once in the mixing console, the recording signal is pre-amplied, EQ’ed and
is then routed to the main bus. Use the LEVEL control to adjust the recording
signal level. The overall level of the signal going to the computer is adjusted
using the MAIN MIX fader. To make sure that the signal is actually being recorded,
useeither the phones bus or the control room bus to monitor not the main
mix signal (i.e. the output signal of the mixing console, before the recording);
instead, monitor the returns of the sound card that is connected to the CD/tape
inputs. To this end, press the CD/TAPE TO CTRL switch and adjust the monitoring
volume using the PHONES/CONTROL ROOM control. Doing so, you can record
additional tracks in addition to a signal already brought in (so-called overdubs).
Usethedirect monitoring function of your DAW.
◊ With this application, the CD/TAPE TO MIX switch should not be
pressed; otherwise, the playback signal from the sound card output
would be routed back to the computer and would be added to the
recording. This would not only be undesirable, it would also create a
feedback loop.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Behringer Xenyx 1002FX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Behringer Xenyx 1002FX in de taal/talen: Engels als bijlage per email.

De handleiding is 2,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Behringer Xenyx 1002FX

Behringer Xenyx 1002FX Gebruiksaanwijzing - Nederlands - 15 pagina's

Behringer Xenyx 1002FX Gebruiksaanwijzing - Deutsch - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info