660493
5
Verklein
Vergroot
Pagina terug
1/31
Pagina verder
8 9X32 PRODUCER DIGITAL MIXER Quick Start Guide
X32 PRODUCER DIGITAL MIXER Getting Started
Mixer Operational Overview
Welcome to the X32 PRODUCER digital mixing
console QuickStart Guide! This document will give
you an overview of the basic operations of the
mixer, allowing you to get up and running quickly.
Whilereading through the information in this
document, we encourage you to experiment with the
consoles dierent screens and controls. The consoles
user interface was designed to be extremely easy
to navigate through and learn. Inaddition to this
Quick Start Guide, thereis anEnglish user manual
available as a PDF downloadfrom behringer.com.
General user interface operation
The X32 PRODUCER user interface is divided into ve
majorsections:
(1) Channel Strip and Monitoring
(2) Input Channels
(3) Display
(4) Group/Bus/Main Channels
(5) Various Assignments
View buttons rule
Throughout the top panel of the console,
youwillnd small buttons labeled View. Press these
buttons to immediately switch the console’s large
color display (known as the Main Display) to show
information related to the section whose View
button you have just pressed.
For example, if you are editing the equalizer
and feel like seeing a large display of the EQ
frequency response curve or corresponding EQ
parametervalue, simply press the adjacent View
button in the EQ section. If you need to check where
the monitor signal is being routed, simply press the
View button next to the Phones Level knob and the
main display will show the details.
With the View button approach of the X32 PRODUCER
console, there is almost never a need to drill down
through multiple menu pages, since the View buttons
will always take you directly to the relevant screen.
Tip: The Setup/Global tab on the main display allows
preferences for the behavior of View and Select
buttons to be adjusted.
Customizing the X32 PRODUCER through the
Utilities page
Press the Utility button, located to the right of
the main display, to bring up useful functions in a
context-sensitive” manner. For example:
• When you are adjusting the equalizer of a
console channel, pressing the Utility button
will oer copying, pasting, loading or saving of
equalizersettings
• Pressing the Utility button while holding a
channel select button depressed will present
a naming screen where you can customize the
channels appearance on both the main display as
well as the small channel display
• On the Routing pages, pressing the Utility button
will oer loading or saving dierent presets of
routing scenarios
• In the Scenes menu, pressing the Utility button oers
copying, loading, saving or naming consolescenes
Sometimes there is more to say
Some of the individual pages
on the main display contain
more adjustable parameters
than can be controlled by
the 6 rotary push encoders
located beneath it. In these
cases there is a small page
number indication, e.g. “1/2”. Simply press the Layer
Up/Down buttons to switch between layers.
Dir 05
Dir 06
Key In
Source
Select
1 2
Section 1: Channel Strip and Monitoring
The X32 PRODUCER’s channel strip oers dedicated
controls for the most important processing
parameters of the currently selected channel.
To adjust controls for a given channel strip,
simply press the Select button on the desired
input or output channel.
Certain sections of the channel strip (such as the
low cut lter, noise gate, EQ and compressor)
contain a respectively labeled button that can be
pressed to switch the specic eect on and o.
Thebutton illuminates to show the eect is active,
and goes dark when bypassed.
Within the channel strip, the rotary control knobs
are surrounded by an amber LED collar that
indicates the parameters value. Whenever this
backlit knob is turned o, it indicates that this
specic control/parameter is not available for the
selected channel type. For example, if an output
bus is currently selected, the LED collar and the
gainknob are turned o, because there is no input
gain to be controlled on an output bus.
The channel strip consists of the following
sub-sections:
• Cong/Preamp
• Gate, Dynamics
• Equalizer
• Main Bus
Each of these subsections correspond to the
processing steps of the currently selected channel,
and they each have their own View button that,
when pressed, switches the Main Display to a page
displaying all related parameters for thatsubsection.
Monitoring and Talkback
There are two separate Level controls in this
section, one for the headphone output located at
the front of the console, and a second one for the
monitor outputs located on the rear panel.
Press the section’s View button to edit various
monitoring preferences, such as the input source
forthe phones bus and the monitor outputs.
This section also contains independent Talkback
buttons (A and B). Press the View button next to
the Phones Level knob, then press Page Select right
to access the Talkback A and B edit pages.
Section 2: Input Channel Banks
You will nd a select button on top of every
channel that is used to direct the control focus of
the user interface, including all channel related
parameters (channel strip and main display),
tothat channel. Please note that at any time,
there is exactly onechannel selected (either Input
Ch 1-32, Aux 1-6/USB, FXReturns 1L-4R, Mix Bus
1-16, Main LR/C, orMatrix 1-6). DCA Groups
(digitally controlled amplier) cannot be selected
because they control a number of assigned
channels rather than one specic channel.
The Input Channels section of the console is
locatedon the left hand side, and oers 8 separate
input channel strips. These 8 channel strips
represent six separate layers of inputs for the
console, including:
• Input Channels 1-8
• Input Channels 9-16
• Input Channels 17-24
• Input Channels 25-32
• Aux Inputs 1-6/USB playback
• Eects Returns
Press any of the correspondingly labeled layer
buttons on the left side of the console to
switch the input channel bank to any of the six
layers listed above. The button will illuminate,
reminding you which layer is active.
Two more layers (Bus Master 1-8 and 9-16)
are also oered, allowingyou to adjust the
levels of the 16 Mix Bus Masters, which is useful
when you wish to include Bus Masters into
DCA Group assignments.
On each fader strip you will nd a motorized
100mm level fader, Mute and Solo buttons,
aGate indicator, an input level meter,
Compressorindicator, and the channel
selectbutton.
(EN) Getting Started
(1) (3) (5)
(4)(2)
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Behringer X32 Producer bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Behringer X32 Producer in de taal/talen: Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 10,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Behringer X32 Producer

Behringer X32 Producer Gebruiksaanwijzing - English - 74 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info