660560
4
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
4 VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual
1. Introduction
The demands placed on a guitar amp are nowadays very broad. A guitarist should
oer a wide array of sounds. That’s why it is very important to us to be able to
oer you maximum sound diversity as well as a variety of connection possibilities
with your VIRTUBE. Don’t worry: you will quickly master the VIRTUBE and learn
how to use all of its capabilities easily and intuitively. With its up-to-date
circuitry, the VIRTUBE features the functionality and reliability of a truly modern
guitar amp.
VTC Virtual Tube Circuitry
The specially developed VTC Virtual Tube Circuitry gives your sound the unique
vintage avor of classic tube amps.
1.1 Before you get started
Your product was carefully packed at the factory to ensure safe transport.
Nevertheless, if the box is damaged inspect the unit immediately for signs
of damage.
If the unit is damaged please do NOT return it to us, but notify your
dealer and the shipping company immediately; otherwise, claims for
damage or replacement may not be granted.
Otherwise, always use the original box to prevent damage during
storage or transport.
Make sure that children cannot play unsupervised with the unit or
its packaging.
Please ensure proper disposal of all packing materials.
Recylce whenever possible.
Ensure adequate air supply and to avoid overheating do not place the unit
near radiators etc.
Please make sure that all devices are properly grounded/earthed.
For your own safety, never remove or disable the ground/earth
conductors from the devices or on the power cords. The unit
must always be connected to the mains outlet with a protective
grounding connection.
1.1.1 Online registration
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Shouldyour
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
claims more quickly and eciently.
Thank you for your cooperation!.
2. Control Elements
(2) (17)
(1) (3)
(4) (5) (6) (7) (8) (10) (11) (12) (13) (14) (15) (16) (20) (21) (22) (23 ) (24) (25) (26)
(18) (19)
(9)
Fig. 2.1: VIRTUBE control elements (front panel)
2.1 Front panel
(1) The INPUT socket is the ¼" connector for your guitar. Please use a standard
¼" TS connector.
2.1.1 CLEAN CHANNEL
(2) The CLEAN CHANNEL LED lights up when the CLEAN channel is active.
(3) The GAIN control determines the volume of the CLEAN channel.
(4) The CRUNCH button (VT100FXH and VT100FX only) allows you to add some
slight distortion to your clean sound, giving it a bit of “dirt” or “crunch”.
(5) The BASS control in the EQ section allows you to raise or lower the bass
frequencies on the CLEAN channel.
(6) With the MIDDLE control you can raise or lower the midrange frequencies
onthe CLEAN channel.
(7) The TREBLE control adjusts the treble frequencies on the CLEAN channel.
(8) Press the CHANNEL button to switch between the CLEAN and OVERDRIVE
channels. The channel LED lights up when the channel is activated. With all
models you can also switch between channels using the footswitch provided.
2.1.2 OVERDRIVE CHANNEL
(9) The OVERDRIVE CHANNEL LED lights up when the channel is active.
(10) The GAIN control determines the amount of gain applied and hence the
degree ofdistortion in the OVERDRIVE channel.
(11) The OD1/OD2 button (VT100FXH and VT100FX only) switches between
twodierent overdrive sounds.
(12) The BASS control in the EQ section allows you to raise or lower the bass
frequencies on the OVERDRIVE channel.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Behringer VT50FX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Behringer VT50FX in de taal/talen: Engels als bijlage per email.

De handleiding is 6,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Behringer VT50FX

Behringer VT50FX Gebruiksaanwijzing - Nederlands - 13 pagina's

Behringer VT50FX Gebruiksaanwijzing - Deutsch - 13 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info