660580
4
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
4 EUROLIVE VP2520/VP1800S/VP1520/VP1220F/VP1220 User Manual
1. Before You Get Started
1.1 Shipment
Your VP series loudspeaker was carefully packed at the assembly plant to assure
secure transport. Should the condition of the cardboard box suggest that damage
may have taken place, please inspect the unit immediately and look for physical
indications of damage.
Damaged equipment should NEVER be sent directly to us. Please inform
the dealer from whom you acquired the unit immediately as well
as the transportation company from which you took delivery.
Otherwise, all claims for replacement/repair may be rendered invalid.
Please always use the original packaging to avoid damage due to
storage or shipping.
Never let unsupervised children play with the loudspeaker or
with its packaging.
Please dispose of all packaging materials in an environmentally
friendly fashion.
1.2 Online registration
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our
website (http://behringer.com).
Registering your purchase and equipment with us helps us process your
repair claims more quickly and eciently.
Thank you for your cooperation!
1.3 Basic operation
Using the VP series loudspeakers is easy and intuitive. Simply follow these steps
to achieve the best possible sound:
1. Plug the line-level outputs from a sound source such as a mixer or stereo
system into a power amp of appropriate size (see 4.2 Power amp rating).
Make sure the sound source and amplier are turned o.
2. Using ¼" TS or professional locking-style speaker cables, plug the power
amp output into the ¼" or locking-style input on the back of the speaker.
DO NOT use instrument cables (i.e., guitar cords) for this connection!
3. If using a pair of VP loudspeakers, run the amp in stereo operation.
If using just one loudspeaker, mono operation is preferable.
4. If using four or more loudspeakers, there are a few ways to make the
connections. The rst is to use two power amps, one for each pair of
loudspeakers. Another is to connect the rst pair of loudspeakers in normal
stereo operation, then use the output jacks on the back of the loudspeakers to
link the second pair of loudspeakers. This way each channel on the power amp
is driving two loudspeakers. Make sure that the wattage and ohm rating are
appropriate for this situation.
Caution
Never connect multiple power amps to one loudspeaker. Doing so could cause
the very fabric of reality to unravel, sending the entire universe into oblivion.
Worse yet, it could destroy your ampliers and your loudspeaker.
5. If using the VP1800S subwoofer, it is important to run the source signal into
a crossover before the power amp(s). This will allow you to direct only the
low frequencies to the subwoofer, and the rest of the sound spectrum to the
full-range loudspeakers.
6. Turn the sound source on (mixer, stereo, etc.).
7. Make sure the volume/gain control on the power amp is turned all the
way down, and then turn the power on.
8. Activate the sound source, whether it is playing music from a CD player or
speaking into a microphone, and adjust the levels. Gradually raise the power
amp volume level to desirable level. If distortion occurs, turn the power
amp volume down. Should the problem persist, make sure distortion is not
occurring at the sound source. If you reach the desired volume level by barely
turning up the power amp level/gain, turn the sound source output down to
allow the power amp to push the speakers more.
9. Rock ‘n Roll!
2. Connections
(1)
(2)
Fig. 2.1: Connector panel
(1) The VP series features two locking professional loudspeaker (1) connectors
that are wired in parallel. You can connect one of the connectors to the
output on your power amp and tap into the signal from the amp on
the second connector, in order, for example, to feed this signal into an
additional loudspeaker. The pin designation of the loudspeaker connector
is pins 1+ and 1-. Pins 2+ and 2- are not connected.
1-
2-
2+
1+
1-
2-
2+
1+
front view rear view
Professional speaker connector
(compatible with Neutrik Speakon connectors)
Fig. 2.2: Professional loudspeaker connector
ATTENTION: Never connect the output signals of dierent power
amps to both parallel inputs at the same time. This may permanently
damage your equipment.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Behringer VP1800S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Behringer VP1800S in de taal/talen: Engels als bijlage per email.

De handleiding is 3,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Behringer VP1800S

Behringer VP1800S Gebruiksaanwijzing - Nederlands - 10 pagina's

Behringer VP1800S Gebruiksaanwijzing - Deutsch - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info