656677
70
Verklein
Vergroot
Pagina terug
1/135
Pagina verder
70 DeepMind 12 User Manual
This is also true for negative values when the VCF ENVELOPE is inverted.
The VCF ENV range is from 0.0% to 100.0%. The default VCF ENV setting is
0.0%(O ).
The fader position, current value and stored value for the VCF ENV fader is shown
on the PROG screen. There is also a visualization of the envelope amount (the
arrow pointing to the right) as shown below:
Note: When you invert the polarity of the envelope, the arrow indicating the
envelope modulation will be reversed and point to the left to indicate negative
modulation.
8.5.6 INVERT SWITCH
This switch controls the polarity of the VCF ENVELOPE modulation. When the
switch is on, the polarity of the envelope will be inverted.
It is advised to set the fader to a lower level when using normal polarity, and
set it to a higher level when using the INVERT function of the VCF ENVELOPE
MODULATION parameter.
The INVERT switch can be set to On or O . The default program setting is On.
8.5.7 VCF LFO FADER
The VCF LFO fader controls the amount of VCF LFO modulation that will be applied
to the cut-o frequency value. You can select which LFO will be used as the
modulation source in the VCF PARAMETERS menu.
When the cut-o frequency is modulated by the VCF LFO each note will be
a ected by the shape and speed of the LFO. You can use this aggressively to
create a wah pedal type e ect, or used subtly to add movement and variation to
the program.
When no LFO MODULATION is applied the  lter cut-o frequency will stay  xed
(unless other sources of modulation are applied).
The cut-o frequency setting can limit the modulation from the LFO. If the VCF
FREQ fader is already at its maximum setting, and the  lter is already wide open
then no positive modulation can take the cut-o frequency higher.
The VCF LFO range is from 0.0% to 100.0%. The default VCF LFO setting is
0.0%(O ).
The fader position, current value and stored value for the VCF LFO fader is shown
on the PROG screen. There is also a visualization of the LFO amount (the arrows
pointing left and right below the LFO-1 text) as shown below:
Note: The distance between the arrows represents the amount of LFO
modulation which is being applied to the  lter cut-o frequency.
Shortcut Note: To change the VCF LFO source press and hold the VCF EDIT
switch. While holding the switch you can use the VCF LFO fader to select the
source LFO. The following message will be shown to give you guidance while
holding the LFO 1 EDIT switch.
ON=INVERTED
70

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Behringer DeepMind 12 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Behringer DeepMind 12 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Behringer DeepMind 12

Behringer DeepMind 12 Snelstart handleiding - Deutsch, English, Français, Português, Espanõl - 17 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info