50917
17
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
17
ULTRACURVE PRO DEQ2496
4. APPLICATIONS
4. APPLICATIONS
The universal concept of the BEHRINGER ULTRACURVE PRO
with its multitude of audio processing functions opens up a whole
range of applications. A few examples with typical settings will
be described in the following.
4.1 Sum-signal equalizer for live applications
This application is the most probable use of the ULTRACURVE
PRO.
Fig. 4.1: The ULTRACURVE PRO as sum-signal equalizer
Please observe a few points to achieve optimum results:
Before you start equalizing the frequency response of your
audio system, we recommend that you listen to uncorrected
music and speech material, which has proven useful in practice:
If distortion occurs, it is liable to be caused by the system and
should be eliminated there.
The setup of the speaker stacks is also important. No equalizer
can substantially improve a sound that is muddied by reflections
from the ceiling and the walls of the room. Often, experiments
with the speaker setup and orientation allow for dramatic
improvements.
In a multi-way system you should also eliminate run-time and
phase differences before equalizing the system (our digital
frequency crossover ULTRADRIVE PRO DCX2496 provides all
functions required for this purpose).
Now its the turn of the DEQ2496. The automatic analyzing
routine (AEQ) helps you find an acceptable basic setting. Make
sure that the measurement microphone is positioned correctly. It
should be located in the direct field of radiation of the system,
and any negative acoustic circumstances should be eliminated.
It is of no use to place the microphone behind a curtain, less than
one meter away from side or rear walls, or on an open balcony,
as this would deteriorate the measuring results. Background
noise must be at least 12 dB below the measuring level to ensure
valid measurements.
Once the system has been analyzed automatically with the
AEQ, the resulting basic setting allows you to fine-tune the
system.
Please note:
A linear frequency response curve is not ideal for all
applications. For example, for speech transmission intelligibility
is the key. As a consequence, the curve should be increasingly
flat towards the low-frequency range, because here the human
voice produces nothing but interference (rumble noise).
Extremely low and high frequencies are usually reproduced
with considerably less energy. There is no point in forcing a
small full-range speaker box to reproduce a frequency response
well below 50 Hz. The best result you can get is the need for
more powerand more money for repairing the speakers.
+ Whenever you set up your audio system, please
always take account of its physical limits.
If time permits, make several measurements with the
measurement microphone at different positions.
Fig. 4.2: Positioning the measurement microphone
Positions 1 and 3 are approx. 1 m on-axis in front of the
speakers, about half the distance between midrange and tweeter
systems. These measurements are used to verify the functioning
of all loudspeakers. Position 2 is located about 2 m in front of the
center of the stage. The measurement should yield roughly the
same result above 250 Hz as the measurements made at positions
1 and 3. Below 250 Hz, the summing of the low-frequency range
should result in a level boost of approx. 3 dB.
Position 4 is located directly in front of the FOH mixing console.
The curve measured here should be the same as at position 2,
however, with a lower level due to the greater distance.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Behringer DEQ2496 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Behringer DEQ2496 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info