765605
9
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
MUSIC CONTROL
Connect an audio source to the RCA input at the rear side (100mV p-p). Switch the music control on via the AUDIO button.
The green LED lights up. Set the required effect via the slider control AUDIO LEVEL.
STORING A RUNNING LIGHT SPEED
1) Switch the music control off.
2) Select the required pattern via the PAGE button and the appropriate slider control of the section PRESET B.
3) Press the MODE SELECT button until the red LED lights up (CHASE-SCENES).
4) Select the MIX CHASE mode via the PARK button (the yellow LED lights up)
5) Set the running light speed via the SPEED slider control or press in the right rhythm twice the TAP SYNC button. You
can repeat this until you have found the correct speed.
6) Store this speed setting in the memory by holding the REC SPEED button down while pressing the flash button of the
appropriate pattern. The slider control that triggers the pattern, must be in the upper position.
ERASING A PROGRAMMED SPEED
1) Switch off the music control.
2) Select the required pattern via the PAGE button and the appropriate slider control of the section PRESET B. Set the
slider control completely to the top.
3) Press the MODE SELECT button until the red LED lights up (CHASE-SCENES).
4) Select the MIX CHASE mode via the PARK button (the yellow LED lights up).
5) Push the slider control SPEED completely down.
6) Hold the REC SPEED button down while pressing the flash button of the appropriate pattern. The fixed speed setting
is now erased.
CHANGING THE RANGE OF THE SPEED CONTROL
This slider control has two adjustable control ranges: 0.1 seconds to 5 minutes and 0.1 second to 10 minutes. Hold the
RECORD/SHIFT button down and press three times in sequence the flash button number 5 (from the top row) to set the
range to 5 minutes, or three times the flash button 10 for the 10 minutes setting. The selected range is indicated by the
yellow LEDs just above the SPEED control.
EXPLANATION OF SOME SPECIAL FUNCTIONS
Note: When the scene setter is switched on, the BLACK OUT function is automatically activated. All outputs are set to zero
so that the connected light effects do not work. Press the BLACK OUT button to leave this mode.
Fade time:
The FADE control sets the fading time between the different light positions.
Single Mode:
In single mode all running light programs will be played in sequence. Select the CHASE-SCENES mode via the MODE
SELECT button (red LED) and the SINGLE CHASE mode via the PARK button (yellow LED). Make sure that the audio
control is switched off. The SPEED control sets the speeds of all patterns.
Mix Mode:
Multiple play of the stored patterns. Select CHASE-SCENES via the MODE SELECT button (red LED) and MIX CHASE via
the PARK button (yellow LED). Make sure that the audio control is switched off and set the speed of the light effects
individually via the SPEED control.
Indications on the display:
The display shows the different settings and pattern numbers. You can choose between the display of the DMX value (0 to
255) or a percentage (0 to 100%) of the light setting. Hold the RECORD/SHIFT button down while pressing the INSERT/%
or 0-255 button. Set one of the slider controls 1 to 24 in the upper position and check the display. If required, repeat these
steps.
The minutes and seconds are indicated on the display by two dots. E.g. 12 minutes and 16 seconds are displayed as
12.16.. If the time is below 1 minute, it is displayed by 1 dot e.g. 12.0 is 12 seconds and 5.00 is 5 seconds.
Blind function:
During automatic play of a running light pattern, it is possible to switch off a particular channel and to control that channel
manually. Hold the BLIND button down while pressing the flash button of the channel that you wish to switch off
temporarily. To switch the channel on again, proceed in the same way.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BeamZ 154.062 - DMX-024PRO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BeamZ 154.062 - DMX-024PRO in de taal/talen: Nederlands, Duits, Engels, Spaans als bijlage per email.

De handleiding is 0,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info