301518
20
Verklein
Vergroot
Pagina terug
1/21
Pagina verder
43
Your washing machine is equipped with safety
functions, which can detect faults early and react
accordingly.
Often these are no more than minor problems
that can be solved quickly.
The appliance fails to start:
Please check whether:
The mains plug is inserted into the socket.
The socket is functioning correctly
(e.g. using a table lamp).
The appliance door is closed (child safety
device?).
A programme has been selected.
The “ON/OFF” button was pressed.
No or little water:
Press the “ON/OFF” button; the indicator light
will go out.
Please check whether:
The tap is turned on fully, the main water
supply (water pressure) is operational.
The inlet hose is kinked.
The mesh filter in the water hose is blocked
or dirty (see “Care and maintenance/water
hose filter”).
The water in the supply hose is frozen.
Press the “ON/OFF” button again to continue with
the programme.
Waste water not drained:
Press the “ON/OFF” button; the indicator light will
go out.
Please check whether:
The drain hose is installed without kinks
(see “Installation Instructions”) .
The pump or the filter is blocked
(see Removing the Filter / Draining Residual
Water”).
IMPORTANT:
Make sure that the water has
cooled before draining.
The water in the drain pipe is frozen.
Press the “ON/OFF” button again in order to
continue the programme.
If the fault occurs again, contact After-Sales
Service (see “After-Sales Service”).
If the water stop was released:
A released water stop can be recognised by the
fact that the water flow is interrupted and a
continuous pumping noise can be heard.
Switch off appliance and close tap.
If excess foam has caused the water stop,
the water collected in the base tray may be
drained by tilting the appliance forward
slightly.
If the water stop is activated again when the
appliance is switched on, contact the After-
sales service.
The appliance vibrates during the
spin cycle:
Please check whether:
The appliance is horizontal with all four feet
on the ground (see “Installation
Instructions”), and the lock nuts are tight.
The transit bolts have been removed.
Before using the appliance the transit bolts MUST
be removed (see “Installation Instructions”)
The laundry is not spun properly after
the programme has terminated or,
subsequently is not dried:
The in-built unbalance control system
recognises excessive unbalance at the start
of the spinning cycle (e.g. for small loads or
loads consisting of large items only). In this
case the appliance automatically terminates
the wash programme without final spin, in
order to avoid possible costly damage to the
appliance. In this case, the laundry will
remain damp after subsequent drying.
Are there larger amounts of foreign bodies in
the filter, or is the drain pump rotor blocked?
Carry out drainage if necessary.
TROUBLESHOOTING GUIDE
20

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bauknecht-wt-1530

Zoeken resetten

  • ik zie de handleiding van mijn wasmachine combi met droger niet. dat is een Bauknecht wt9840.
    het probleem is dat het lijkt of de trommel, die een enorme herrie maakt sinds laatste was eergisteren, loszit? het is al een oudje maar kan daar nog wat aan gedaan worden of is het tijd voor een nieuwe? Gesteld op 28-2-2015 om 09:10

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht wt 1530 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht wt 1530 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bauknecht wt 1530

Bauknecht wt 1530 Gebruiksaanwijzing - Deutsch - 21 pagina's

Bauknecht wt 1530 Gebruiksaanwijzing - English - 21 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info