53098
11
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
63
Fault display table
a.Fault in the water supply
The appliance has no or insufficient water supply.
For models with a fault display, the “Water tap” lamp
lights up and (depending on model) the spin speed
indication lamps flash.
For models with no fault display, the washing machine
stops in the appropriate programme step.
Switch the appliance off and pull out the mains plug.
Check whether:
the water tap is fully turned on, and the water
supply pressure is sufficient
the water inlet hose is kinked
the water connection mesh filters are blocked
(see “Care And Maintenance”/”Mesh Filters in the
Water Connection”)
the water supply hose is frozen up
the washing machine has a safety hose and the
safety valve is open (red indicator in the safety valve
inspection window); In this case replace it with a
new safety hose
Reconnect the appliance to the electrical socket.
For models with a fault display, reselect the desired
programme and start it.
For models without a fault display continue the
programme by pressing the “On/Off” or the “Start” or
the “Start/Pause” button (depending on model) again.
If the fault occurs again, please contact After-Sales
Service (see “After-Sales Service”).
b.Draining fault
Waste water not pumped out.
For models with a fault display the spin speed indication
lamps flash and the pump display flashes. If a digital display
is fitted, “P
” and “F” are also displayed alternately.
For models with no fault display, the washing machine
stops in the appropriate programme step.
Switch the appliance off and pull out the mains plug.
Check whether:
the drain hose is kinked
the pump or the filter is blocked (see “Removing
The Filter”)
IMPORTANT:
before draining, make sure that the
water has cooled down.
The water in the drain hose is frozen up
Reconnect the appliance to the electrical socket.
For models with fault display, select and start the
“Drain” cycle.
To rinse the laundry, we then recommend a short
programme without the addition of detergent.
For models without a fault display continue the
programme by pressing the “On/Off” button again.
If the fault occurs again, please contact After-Sales
Service (see “After-Sales Service”).
c. Fault in an electrical component
The appliance stops in the middle of a programme.
For models with a fault display, the spin speed
indication lamps flash. If a digital display is fitted, “F4
” to
“F16
” are also displayed.
Switch the washing machine off. First of all select and
start the “Drain” cycle.
Then select and start the desired programme again.
For models with no fault display, the washing machine
stops in the appropriate programme step.
First switch the washing machine off and on again to
continue with the programme.
If the fault persists, please contact After-Sales Service
(see “After-Sales Service”).
d.“Water Stop” fault
(if fitted)
The “Water Stop” fault may have been triggered by:
1.
excess foaming
2.
a leak in the washing machine.
In this case the pump is switched on automatically in
order to pump the water out.
For models with a fault display, the “Water Stop”
indication flashes and the spin speed indication lamps
flash. If a digital display is fitted, “A
” and “F” are also
displayed alternately.
For models with no fault display, the washing machine
stops in the appropriate programme step.
Switch the appliance off, pull out the mains plug
and turn the water tap off.
Tilt the appliance forwards ( with 2 people it is
suggested), to allow the collected water to flow out
from the bottom of the appliance.
Then:
1.
Plug in the appliance.
2.
Turn the water tap on (if water immediately flows
into the appliance again, without the appliance being
started, there is a fault. Turn off the tap and notify
After-Sales Service).
3.
For models with fault display, select and start the
desired programme again.
For models with no fault display, continue the
programme by pressing the “On/Off” button again.
If the fault occurs again, please contact After-Sales
Service (see “After-Sales Service”).
Luminous display
Spin
speed
lights
Digital display
(if fitted)
Fault description
“Water tap” flash “H” and “F” “Fault in water supply”
“Pump” flash “P” and “F” “Draining fault”
- flash from “F4” to “F16 “Fault in an electrical component
“Water Stop” flash “A” and “F” “Water Stop fault”
4GB05140.fm Page 63 Wednesday, April 14, 2004 12:18 PM
Black process 45.0° 100.0 LPI
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht WAK7990 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht WAK7990 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info