506949
8
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
GB 8
TROUBLESHOOTING GUIDE
Your washing machine is equipped with various automatic safety functions. These enable faults to be
detected in good time and the safety system can react appropriately. These faults are frequently so minor
that they can be removed within a few minutes.
Problem Causes, Solutions, Tips
Appliance does not start, no
indicator lamps are on
Plug is not properly inserted in socket.
Socket or fuse does not function correctly (use a table lamp or similar appliance to test it).
the “On/Off” button has not been pressed (if available on your model).
Appliance does not start
although “Start/Pause” has
been pressed
Door is not properly closed.
The “Child lock/Lock buttons” feature has been activated (if available on
your model). To unlock the buttons, push the two buttons marked with the key
symbol simultaneously and hold them at least for 3 seconds. The key symbol on the
display disappears and the programme can be started.
Appliance stops during the
programme, and the “Start/
Pause” light blinks
“Rinse hold” is activated, and the “Rinse hold” symbol lights up in the programme
sequence indicator. Press the
“Start/Pause”
button to start the drain programme.
Programme has been changed - reselect desired programme and press
“Start/Pause”
.
Programme has been interrupted and eventually door has been opened - close
door and restart programme by pressing
“Start/Pause”
.
The appliance’s safety system has been activated (see “Description of failure
indications” in your programme chart).
Water tap is not opened or water inlet hose is kinked or blocked (“Water tap
closed” indication lights up).
Detergent dispenser
contains residues from
detergent and/or additives
Water entering is not enough; the mesh filters of the water supply could be blocked
(see “Care And Maintenance”).
Appliance vibrates during
spin cycle
Transport bolts have not been removed;
before using the washing machine, it
is imperative that the transport bolts are removed.
Appliance is not level / not standing firmly on all four feet (see separate “Installation Guide”).
Final spin results are poor
The appliance has an unbalance detection and correction system. If individual heavy items
are loaded (e.g. bathrobes), this system may reduce the spin speed automatically or even
interrupt the spin completely in order to protect the washing machine.
Heavy item(s) prevented spinning; add smaller articles of laundry and repeat spin cycle.
Excessive foam formation prevented spinning; select and start “Rinse & Spin”
programme. Avoid excessive detergent dosing (see “Detergents And Additives”).
“Spin” button has been set to a low spin speed.
The washing machine is at a
standstill for several minutes
in the middle of a running
programme; the wash
programme seems not to
proceed
Normal function of the washing machine used for optimizing the rinse phase. One
reason for such a pause can be that you might have used too much detergent; the
washing machine automatically interrupts the programme to have the foam reduced.
This standstill may be repeated several times until the foam reduction is sufficient to
continue the wash cycle. If the foam persists, the red “Service” indicator will light up
and the display shows “F18” or “Fod” - refer to the instructions concerning the
“Service” indication on the next pages in this case.
Detergent residues on
laundry after wash
Whitish residues on dark fabrics are caused by insoluble compounds used in
phosphate-free powder detergents.
- avoid overdosing of detergent; use liquid detergent; select “Intensive Rinse” option
if possible; brush out the fabric.
Programme duration is
considerably longer or
shorter as indicated in the
“programme chart” or on
the display (if available)
Normal function of the washing machine to adapt to factors that can have an effect
on the programme duration, like excessive foam formation, load unbalance due to
heavy laundry items, prolonged heating time resulting from low inlet water
temperature etc.. Moreover, the sensing system of the washing machine adapts the
programme duration to the size of the wash load.
Depending on these factors, the duration is recalculated during the programme and
updated if necessary;
during such periods, an animation appears on the display
(if available).
For small loads, the programme time indicated in the "programme
chart" may be reduced by up to 50%.
30106370GB.fm Page 8 Thursday, January 20, 2011 4:52 PM
Black process 45.0° 130.0 LPI
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht WAK 2770 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht WAK 2770 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bauknecht WAK 2770

Bauknecht WAK 2770 Snelstart handleiding - Nederlands - 2 pagina's

Bauknecht WAK 2770 Gebruiksaanwijzing - Nederlands - 11 pagina's

Bauknecht WAK 2770 Gebruiksaanwijzing - Deutsch - 2 pagina's

Bauknecht WAK 2770 Gebruiksaanwijzing - Deutsch - 11 pagina's

Bauknecht WAK 2770 Snelstart handleiding - English - 2 pagina's

Bauknecht WAK 2770 Snelstart handleiding - Français - 2 pagina's

Bauknecht WAK 2770 Gebruiksaanwijzing - Français - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info