73601
16
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
35
AFTER-SALES SERVICE
Before contacting After-Sales Service:
1.
See if you can solve the problem yourself
(see “Troubleshooting guide/after-sales
service”).
2.
Switch the appliance on again to see if the
problem has been solved. If it has not, disconnect
the appliance from the power supply and wait for
about an hour before switching on again.
3.
If the problem persists after this course of action,
contact After-sales Service.
Specify:
the nature of the problem,
the model,
the Service number (the number after the word
SERVICE on the data plate on the inside of the
appliance),
your full address,
your telephone number and area code
Note:
The direction of door opening can be changed.
If this operation is performed by After-sales
Service it is not covered by the warranty.
Remember
Motor running time depends on different things: number of door openings, amount of food stored,
temperature of the room, setting of the temperature controls.
If, after performing the above checks, your appliance still does not work properly, contact the After-sales
Service, explain the problem, specifying the model and appliance service number (stated on the data
plate).
If the refrigerator temperature is too high
Is the appliance installed near a heat source?
Are the refrigerator controls correctly set?
Has a large amount of food been added to the refrigerator or freezer?
Check that the doors are not opened too often.
Check that the doors close properly.
Make sure that air flow vents inside the compartment are not blocked, as this prevents the circulation
of cold air.
If there is moisture build-up
Make sure that the food is properly packaged. Dry any dampness on food containers before placing
them in the refrigerator.
Check that the doors are not opened too often. When the door is opened, humidity from the room air
enters the refrigerator. The more often the door is opened, the faster humidity builds up, especially
when the room itself is very humid.
If the room is very humid, it is normal for moisture to build up inside the refrigerator.
It is normal for droplets of water to form on the rear wall after the automatic defrost cycle.
If the doors do not open and close properly
Check that food packages are not blocking the door.
Check that the door trays, shelves and drawers are all positioned correctly.
Check that the door seals are not dirty or sticky.
Ensure the appliance is level.
Always disconnect the refrigerator from the power supply before replacing any light bulbs.
If the inside light is not working:
Disconnect the appliance from the mains power supply.
Depending on the model
Remove the bulb cover (depending on model)
Unscrew or remove the bulb.
Check the bulb and if necessary replace it.
Some models are equipped with a special bulb, which does not unscrew. Pull towards the inside of the
appliance. This bulb is available only from our After-sales Service. Replace using maximum 15W bulb.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht KDNA 4300 IN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht KDNA 4300 IN in de taal/talen: Engels als bijlage per email.

De handleiding is 2,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bauknecht KDNA 4300 IN

Bauknecht KDNA 4300 IN Gebruiksaanwijzing - Nederlands - 16 pagina's

Bauknecht KDNA 4300 IN Gebruiksaanwijzing - Deutsch - 16 pagina's

Bauknecht KDNA 4300 IN Gebruiksaanwijzing - Français - 17 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info