72606
5
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
16
HOW TO FILL THE SALT CONTAINER
From a water hardness category of 1–2 (medium), before using the dishwasher, fill the salt container with
regeneration salt (to find out the hardness level of water in your area, contact your local Water Board or check
the last bill you received).
The dishwasher is equipped with an electronic control system that allows you to adjust the water softening system
to suit the local water hardness level.
Adjust the water softening system as follows:
If the water hardness level does not correspond to position h3 on the selector (setting on delivery) or if the water
hardness level changes:
Press the PROGRAMME DELAY button for a few seconds until the 3 DIGIT DISPLAY shows the set value
followed by a dot (3.).
Once the display shows the desired value, release the button; after 5 seconds the setting automatically returns
to programme delay and water hardness level is set to the selected value.
To exit the programming mode press the SET PAUSE button or simply wait approx. 2 seconds without
pressing any button.
Programming must be carried out with the door open; it cannot be carried out with the selector set to the “soak”
cycle.
NOTE:
the display shows water hardness setting and the programme delay. A dot (.) after the number indicates
that the number on the display refers to water hardness level. If no dot (.) is visible, the number on the display
refers to the programme delay.
Hardness
level
German
degrees
°dH
French
degrees
°fH
mmol/l Clarke scale or
English degrees
°eH
Setting
1 soft 0 - 4 0 - 7 0 - 0.7 0 - 5.0 0.
1 - 2 medium 5 - 15 8 - 25 0.9 - 2.7 6.3 - 22.9 1.
2 average 16 - 23 26 - 40 3.8 - 4.2 23.8 - 32.3 2.
3 medium-hard 24 - 31 41 - 60 4.3 - 6.3 33 - 43.8 3.
4 hard 32 - 47 61 - 80 6.5 - 7.4 45 - 51.3 4.
5 extremely hard 48 - 58 81 - 100 8.7 - 10.6 52 - 64 5.
How to fill the salt container
Warning: only use regeneration salts for use domestic dishwashers!
Do not fill the salt container with unsuitable substances, such as detergent,
as this will cause irreparable damage to the water softener system.
1.
Remove the lower rack.
2.
Unscrew the cap by turning it counter-clockwise.
3.
When first using the dishwasher: fill the salt container to the rim
with water.
4.
Fill the salt container with regeneration salt to the rim (using the
funnel provided) (when filling for the first time min. 1.5 kg and
max. 1,7 kg) and stir with a spoon handle.
5.
Screw the cap back on by turning it clockwise.
6.
Fit the lower rack.
7.
If regeneration salt is to be added,
immediately
start a wash
programme (rinsing alone is not sufficient) in order to eliminate
any residual saline solution straight away and avoid corrosion.
Salt level indicator
The dishwasher is equipped with an electric or visual salt level
indicator (depending on the model installed).
Electric indicator
The salt level indicator lamp on the control panel lights up when the
salt container is empty.
Visual indicator
The float is clearly visible in the cap window when the salt container is
full (see photo).
The float lowers and is no longer visible when the salt container is empty.
49694610GB.fm Page 16 Wednesday, November 3, 2004 12:14 PM
Black process 45.0° 150.0 LPI
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht GMX 5997 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht GMX 5997 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bauknecht GMX 5997

Bauknecht GMX 5997 Gebruiksaanwijzing - Nederlands - 9 pagina's

Bauknecht GMX 5997 Gebruiksaanwijzing - Deutsch - 9 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info