806820
7
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
TROUBLESHOOTING
If the hob will not operate correctly, before calling the After-Sales Service,
refer to the Troubleshooting Guide to determine the problem.
Read and follow the instructions given in the section “Daily use“.
Consult the table below for instructions.
Check that the electricity supply has not been shut o.
Dry the hob thoroughly after cleaning it.
If after the above checks the fault still occurs, get in touch with the nearest
After Sales Service.
FAILURE DESCRIPTION POSSIBLE CAUSES MEASURE
The hob does not switch on.
Missing power supply. Check that power supply is on.
Wrong connection of the
main cable.
Call a qualied technician to check the cable connection.
Hob failure. Call after sales service.
The hob switch on but “F“ alternately to one of “0, A, C,
E, t, H, J, U, 3, 4, 5, 6, r“ symbol is shown on the displays.
Hob failure.
Restart the hob (disconnect and reconnect to the power
supply), if the problem persists call after sales service.
Heater does not heat up but the display is on. Hob failure. Call after sales service.
The hob plays 3 acoustic signals and then shut o.
One or more buttons are
continuously pressed for
more than 3 seconds.
Remove any object or liquid that is placed over the control
panel.
Not possible to switch the hob o. Hob failure.
Disconnect the hob from power supply and call After sales
service.
The heater is not continuously on, it switches on and
o cyclically even if on the display the power lever
does not change.
Normal functioning of the
hob.
The on/o cycle allows the power regulation of the
heater and is completely normal. In some cases a thermal
protection could switch o the heater for some time
to avoid the glass damage. Examples of such cases are:
cooking long time at high power level, usage of pots
smaller than the heating element, pot bottoms not at.
The hob switch on but “F“ alternately to one of “c, t, E“
is shown on the displays.
Control panel overheating
or damaged temperature
sensor.
Wait until control panel temperature cool down. The hob
will automatically switch on when the temperature drops
below operating limit. If not, call after sales service.
The hob switching o automatically.
Liquid presence on the HMI.
Dry the HMI and turn the hob back on.
MAINTENANCE AND CLEANING
Disconnect the appliance from the power supply.
Do not use steam cleaning equipment.
Do not use abrasive sponges or scouring pads as they may damage
the glass.
After each use, clean the hob (when it is cool) to remove any deposits
and stains from food residue.
Sugar or foods with a high sugar content can damage the hob and
must be immediately removed.
Salt, sugar and sand could scratch the glass surface.
Use a soft cloth, absorbent kitchen paper or a specic hob cleaner
(follow the Manufacturer’s instructions).
Spills of liquid in the cooking zones can cause the pots to move or
vibrate.
After cleaning the hob, dry thoroughly.
EN
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht CTAR 8642-1 IN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht CTAR 8642-1 IN in de taal/talen: Engels als bijlage per email.

De handleiding is 0,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bauknecht CTAR 8642-1 IN

Bauknecht CTAR 8642-1 IN Gebruiksaanwijzing - Nederlands - 10 pagina's

Bauknecht CTAR 8642-1 IN Gebruiksaanwijzing - Deutsch - 8 pagina's

Bauknecht CTAR 8642-1 IN Gebruiksaanwijzing - Français - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info