723437
5
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
EN
2. Create an account
If you haven’t done so already, you’ll need to Create
an account. This will enable you to network your
appliances and also view and control them remotely.
3. Register your appliance
Follow the instructions in the app to register your
appliance. You will need the Smart Appliance
IDentifier (SAID) number to complete the registration
process. You can find its unique code the number on
the identification plate attached to the product.
4. Connect to WiFi
Follow the scan-to-connect setup procedure. The app
will guide you through the process of connecting
your appliance to the wireless network in your home.
If your router supports WPS 2.0 (or higher), select
“MANUALLY”, then tap WPS Setup”: Press the
WPS button on your wireless router to establish a
connection between the two products.
If necessary, you can also connect the product
manually using “Search for a network”.
The SAID code is used to synchronise a smart device with
your appliance.
The MAC address is displayed for the WiFi module.
The connection procedure will only need to be
carried out again if you change your router settings
(e.g. network name or password or data provider).
. SETTING THE TIME AND DATE
Connecting the oven to your home network will set
the time and date automatically. Otherwise you will
need to set them manually
Tap the relevant numbers to set the time.
Tap “SET to confirm.
Once you have set the time, you will need to set the
date
Tap the relevant numbers to set the date.
Tap “SET to confirm.
4. SET THE POWER CONSUMPTION
The oven is programmed to consume a level of electrical
power that is compatible with a domestic network that
has a rating of more than 3 kW (16 Ampere): If your
household uses a lower power, you will need to
decrease this value (13 Ampere).
Tap the value on the right to select the power.
Tap “OKAY to complete initial setup.
5. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal. Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent
film from the oven and remove any accessories from
inside it. Heat the oven to 200 °C for around one hour.
It is advisable to air the room after using the appliance for the
rst time.
6. FILL THE RESERVOIR
To allow the emission of steam during cooking, this
device is equipped with a reservoir (not visible).
Selecting a recipe or a cycle that requires steaming, the
display will ask you to insert the inlet pipe for loading
water and a led close to the insertion area will turn on.
Connect the pipe without pressing the button. Once the
pipe is completely inserted, you will hear a click.
Please note: There is only one way to connect the pipe
correctly, keeping the push button on the left side.
Then place the end of the pipe in a jug/container filled
with at least 1,7 liters of drinking water. For an optimal
steam performance it is recommended to load the
reservoir with ambient temperature water. If you place
the container on the appliance door, please take care to
place it gently in order to avoid any damage to the door
glass.
Once started, the process will
stop automatically when the
reservoir is filled.
At the end, the display will
prompt to unplug the pipe
pressing the button on its
upper left side and lightly
pulling down.
Please note: In order to avoid any
water leakage, it is
recommended to disconnect the
lling accessory while it is still
inside the drain container; then remove them and close the
door.
Now it is possible to start the cooking cycle or the
desired recipe.
After a long period of non-use of the Steam functions, it is
highly suggested to activate a steam cooking cycle with the
empty oven by lling completely the reservoir.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht BIK11 FPH8TS2 PT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht BIK11 FPH8TS2 PT in de taal/talen: Engels als bijlage per email.

De handleiding is 21,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bauknecht BIK11 FPH8TS2 PT

Bauknecht BIK11 FPH8TS2 PT Gebruiksaanwijzing - Nederlands - 36 pagina's

Bauknecht BIK11 FPH8TS2 PT Gebruiksaanwijzing - Deutsch - 36 pagina's

Bauknecht BIK11 FPH8TS2 PT Gebruiksaanwijzing - Français - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info