758164
7
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
7
English
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g. Use the power tool, accessories and
tool bits etc., in accordance with these
instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from intended
could result in a hazardous situation.
3.5 Service
a. Please use a qualied expert who
uses original replacement parts to
repair your power tool. This will ensure
proper functioning of the power tool.
4. Additional safety warnings for
nishing sanders
Contact with or inhalation of dust
coming free during use (e.g. lead-
painted surfaces, wood and metal)
can endanger your health and the
health of bystanders. Always wear
appropriate protective equipment,
such as a dust mask. Always use
proper dust extraction during use.
Do not work materials containing
asbestos. Asbestos is considered
carcinogenic.
Do not use the machine for sanding
magnesium workpieces.
Wear safety goggles, hearing protection
and if necessary other protective
means, such as safety gloves, safety
shoes, etc.
Be very careful when sanding painted
surfaces.
Before use, remove all nails and other
metal objects from the workpiece.
Make sure that the workpiece is prop-
erly supported or xed.
Only use sanding paper that is suitable
for use with the machine.
Only use sanding paper with the correct
dimensions. Make sure that the sanding
paper is properly mounted.
Inspect the sanding paper before each
use. Do not use sanding paper that is
worn because of prolonged use.
Never put the machine down on a table
or a workbench before it has been
switched off.
5. Electrical safety
Always check that the voltage of
the power supply corresponds to
the voltage on the rating plate.
Do not use the machine if the mains
cable or the mains plug is damaged.
Only use extension cables that are suit-
able for the power rating of the machine
with a minimum thickness of 1.5 mm2.
If you use a extension cable reel, always
fully unroll the cable.
6. Contents of packing
1x Finishing sander
1x Sanding Paper
1x Dust Collection Box
1x Instruction manual
7. Before the rst use
Remove the machine and all accessories
from the package. Keep the packaging
materials out of the reach of small children.
There is a danger of suffocation!
8. Intended use
The nishing sander is intended for sanding
wood, plastic, stone, composites, paint,
ller, and similar materials.
Metal and materials containing asbestos
must not be worked with the nishing
sander. The nishing sander is only
intended for dry sanding.
9. Selecting the sanding paper
Always use abrasive papers suited to
the material you want to sand. The
papers must have the correct grain size.
The grain is either Corundum or
Carbide.
Depending on grain size there are
degrees of coarseness. The coarseness
is specied by a number on the back of
7062853-Finishing-Sander-250W-Ma-0-Book-1705-15.indb 7 29-12-17 10:12
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Batavia BT-FS002 - 7062853 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Batavia BT-FS002 - 7062853 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 3,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info