675146
4
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
Operating instructions
°
Intended use

The product is used to automatically turn on/off an electric load (e.g. heater or air conditioner)
when the temperature is below/above a certain level.
See chapter “Technical data” for information on connection and the maximum permissible
power consumption of the connected electrical loads.
This product is only to be installed and used indoors in dry conditions.
Always observe the safety instructions and all other information included in these operating
instructions. Read the operating manual carefully; keep it in a safe place or pass it on to others
using the product.
Any use other than that described above could lead to damage to this product and involves
the risk of short circuits, fire, electric shock, etc. No part of the product may be modified or
converted!
This product complies with the applicable national and European requirements. All names
of companies and products are the trademarks of the respective owners. All rights reserved.
Package contents

Room temperature controller
Operating instructions
Up-to-date operating instructions:
1. Open www.conrad.com/downloads in a browser or scan the dis-
played QR code.
2. Select document type and language and enter the item number
into the search field. After submitting the query you can download
displayed records.
Explanation of symbols

The lightning symbol indicates a health hazard, e.g., electric shock.
This symbol indicates specific risks associated with handling, operation or use.
The arrow symbol indicates special tips and operating information.
The product may be used only in dry, indoor rooms; it must not get damp or wet.
Observe the operating instructions!
Safety instructions

Read the complete operating manual carefully before using the product, as it
contains important information about the correct installation and operation.
Damages due to failure to follow these operating instructions will void the
warranty! We do not assume any liability for any resulting damage!
Attention, important note!
This device should be installed only by people with relevant electro-technical
knowledge and experience! *)
If it is not installed properly, you risk:
• your own life
• the life of the user of the electrical system.
If it is installed improperly, you risk severe damage to property, e.g., by fire.
You face the risk of personal liability for personal injury and material damage.
Contact an electrician!
*) Specialist knowledge required for the installation:
For the installation, in particular, the following specialist knowledge is required:
the “5 safety rules” to be followed: Switch off power; secure against switching back
on; determine voltage-free status; earthing and short-circuiting; cover or fence off
nearby live parts
Choose appropriate tools, meters and, if necessary, personal protective equip-
ment
• Evaluation of the measurement results
Choose the electrical installation material to ensure the disconnect conditions
• IP protection types
• Installation of the electrical installation material
Type of mains supply network (TN system, IT system, TT system) and the con-
nection conditions that follow from them (classical earthing, protective earthing,
required additional measures, etc.)
If you do not have the expertise required for the installation, do not connect
and install it yourself, rather ask a qualified technician.
a) General
The unauthorised conversion and/or modification of the product is not permitted for
safety and approval reasons (CE). Never open/dismantle it (apart from the works
for installation and connection described in the manual)!
Maintenance, adjustment or repair work may only be carried out by an expert/
authorised service centre, which is familiar with the hazards involved and the
relevant regulations.
The product is not a toy and does not belong in the hands of children. There is a
risk of a life-threatening electric shock!
The accident prevention regulations of the association of compensation insurers
must be followed when using all electrical facilities and equipment in commercial
locations!
Do not leave the packaging material unattended since this may become a danger-
ous plaything for children.
Handle the product with care; it can be damaged by impacts, blows, or accidental
falls, even from a low height.
If you have any questions that are not answered in these operating instructions,
please contact our technical department or another specialist.
b) Operating location
The product may be installed and used only in dry indoor spaces; it must not get
damp or wet!
Use the product only when it is securely installed and steady. Never install and use
the product in a vehicle.
Be especially careful if children are around. Children cannot recognise the danger
arising from the incorrect use of electrical devices. There is a risk of a life-threat-
ening electric shock!
The product must not be exposed to extreme temperatures, direct sunlight, strong
vibrations, dust, dirt or heavy mechanical stress. Keep the product away from
strong magnetic fields generated by machines, electric motors or loudspeakers.
Do not operate the device in environments where there are high levels of dust,
flammable gases, vapours or solvents. There is a danger of fire and explosion!
c) Installation, Connection
During installation, all poles must be disconnected from the mains voltage, e.g., via
RCD. There must be an appropriately dimensioned fuse or circuit breaker between
the RCD and the product.
Install the product only in an easy-to-reach position.
Perform installation and connection only when all supply lines are disconnected
from the mains voltage. Otherwise, there is a risk of a life-threatening electric
shock!
Also observe the safety and operating instructions of any other devices that are
connected to this product.
Do not connect the product to the power supply immediately after it has been
transferred from a cold room into a warm one (e.g., during transport). The conden-
sation that forms might destroy the device. Moreover, there is danger of electric
shock!
Allow the device to reach room temperature before switching it on. Wait until
the condensation has evaporated. This might take several hours. Only after this
should it be installed, connected to the mains supply and put into use.
Room temperature controller “MH-555C“
Item no. 1407844
Version 06/17
°
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Basetech MH-555C bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Basetech MH-555C in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info