738539
4
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2017 by Conrad Electronic SE. 1529040_V2_0317_02_VTP_m_en
Never touch a time switch that shows signs of damage, as this could cause a fatal
electric shock!
First, switch off the mains voltage to the socket to which the time switch is con-
nected (switch off at the corresponding circuit breaker or remove the safety fuse
or switch off at the corresponding RCD protective switch, so that the socket is fully
disconnected).
Only then can you remove the time switch from the mains socket. Do not use the
damaged time switch any longer and dispose of it in an environmentally-friendly
manner.
Preparation
Type plates in different languages are included in the package. Stick the language plates in
your language over the German language label on the back of the time switch.
Initial operation
Plug the time switch (without any device plugged in!) into a suitable mains socket (with a
protective earth conductor).
If the time switched is used outdoors, plug it only into an IP44 wall outlet with earth contact.
You must only use it in the position described below. The socket must be on top, the wheel for
setting the time at the bottom. Both covers must open upwards.
Top
Bottom
Setting the time
Lift the transparent cover with one hand. Turn the outer ring with the hours printed on it clock-
wise with the other hand until the arrow “ ” on the inner ring shows the current time. Close
the cover.
Turn the setting ring only clockwise to the right; it is easy to move.
It is not possible to turn it anti-clockwise! Do not exert any force! If the time switch is
damaged due to that, the warranty will be void!
The time switch only works when it is supplied with electricity, i.e. when it is connected to an
active mains socket.
Setting the on/off times
You can set the times for switching the connected device on and off with the 48 segments
(2 per hour) in a 30-minutes raster. A segment pressed down activates the socket (voltage on,
connected device on), a segment pushed upwards or pulled out switches the socket off (no
voltage, the connected device is off).
Example: If you wish a lamp to be switched on between 22:00 and 23:00, press the two seg-
ments between 22:00 and 23:00 downwards. All the other segments must be pulled out.
Due to the design of the time switch (mechanical operation and switch process; 48
shift segments for 24 hours), deviations from the switching times will occur.
For switching processes or switching times that require accuracy, electronic timer
switches should be used instead.
However, the mechanical time switch has the great advantage that a setting can be
made very quickly.
Connecting a device to the time switch
Switch the device off.
Flip the cover of the time switch outlet open and hold the cover with one hand.
Plug the device into the time switch outlet; push the plug fully into the outlet of the time switch.
Slowly close the cover of the time switch (do not let it ip shut).
Switch the device on.
Care and cleaning
Before cleaning the product, disconnect the appliance from the time switch. Disconnect then
the time switch from the power supply by pulling it out of the mains socket.
Never use abrasive cleaning agents, rubbing alcohol or other chemical solutions, since these
could damage the housing or even impair operation.
Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable material and do not belong in the household
waste. Dispose of an unserviceable product in accordance with the relevant statu-
tory regulations.
Technical data
Operating voltage .................................230 V/AC, 50 Hz
Connection power .................................Resistive load: max. 3680 W (230 V/AC, 16 A)
..............................................................Inductive load: max. 460 W (230 V/AC, 2 A)
Devices with mainly resistive load are, e.g., light bulbs, heaters, etc.
Powered devices with inductive load are, e.g., motors, control gears, conventional
transformers, energy-saving bulbs, etc.
Protection class ....................................I
Protection type ......................................IP44
Switch type ...........................................Micro-switch (single-pole)
Smallest switchable time unit ...............30 min (48 switch segments for 24 hours)
Socket with child protection ..................yes
Operating conditions .............................Temperature -20 °C to +40 °C
Dimensions ........................................... 130 x 60 x 95 mm (L x W x H, including plug)
Weight ..................................................156 g
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Basetech 1529040 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Basetech 1529040 in de taal/talen: Nederlands, Duits, Engels als bijlage per email.

De handleiding is 0,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info