22653
5
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
Use BeoLab 5 with a non-Bang&
Olufsen system
The loudspeakers must be connected as explained
on page 10, and the Option number set to 1 or 4,
as explained on page 11.
Operate your non-Bang & Olufsen system as you
normally would. However, you will have to use a
Beo4 remote control (optional accessory) to do the
following:
Switch the loudspeakers on and off;
Turn the volume level up or down;
Adjust the left–right sound balance (when you
switch on the loudspeakers, the balance is
always neutral);
Store and reset sound levels;
Use the PIN code system;
Change Option setting and LINE input level.
Although BASS, TREBLE, LOUDNSS are available in
the Beo4 display you cannot adjust these levels
usingBeo4. We recommend that you keep any
tonecontrol settings neutral.
For specic information about the Beo4 remote
control, please refer to its own guide
.
If BeoLab 5 is programmed to
Option 1
To switch BeoLab 5 on/off…
> Press RADIO to switch on.
> Press • to switch off.
To turn the volume level up/down...
> Press to turn the volume up.
> Press
to turn the volume down.
To reset the sound level...
> Press LIST, until RESET* is shown in the Beo4
display
> Press the centre button to reset sound level.
To shift the left–right sound balance...
> Press to shift the sound towards the left, and
press
to shift the sound towards the right.
To store a new start up sound level…
> Press until you reach your preferred start up
sound level.
> Press LIST until A.SETUP* is shown in the Beo4
display.
> Press the centre button to accept.
> Press LIST until S.STORE is shown in the Beo4
display.
> Press the centre button to store the setting.
If BeoLab 5 is programmed to
Option 4
To switch BeoLab 5 on/off…
> Press LIST until LINK* is shown in the Beo4
display, and then RADIO to switch on.
> Press • to switch off.
To turn the volume level up/down...
> Press to turn the volume up.
> Press
to turn the volume down.
To reset the sound level...
> Press LIST until RESET* is shown in the Beo4
display.
> Press the centre button to reset sound level.
To shift the left–right sound balance...
> Press to shift the sound towards the left
press
to shift the sound towards the right.
To store a new start up sound level…
> Press until you reach your preferred start up
sound level.
> Press LIST until A.SETUP* is shown in the Beo4
display.
> Press the centre button to accept.
> Press LIST until S.STORE is shown in the Beo4
display.
> Press the centre button to store the setting.
*Must be added to the Beo4 LIST-function. See the
Beo4 online guide at www.bang-olufsen.com/guides
.
Option 1
Option 4
5
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bang Olufsen Beolab5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bang Olufsen Beolab5 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bang Olufsen Beolab5

Bang Olufsen Beolab5 Gebruiksaanwijzing - Nederlands - 20 pagina's

Bang Olufsen Beolab5 Gebruiksaanwijzing - Deutsch - 20 pagina's

Bang Olufsen Beolab5 Gebruiksaanwijzing - Français - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info