Operating the appliance en
31
■ If the ® symbol disappears in the
display panel, the washing machine
door is unlocked. You can add or
remove laundry.
Notes
– Do not leave the door open for
too long when adding/removing
laundry as water from the laundry
may leak out.
– The load display is not active
during reloading.
Press the inicio/pausa (Start/
Reload) í button to continue the
programme.
■ If the ® symbol lights up in the
display panel, it is not possible to
add or remove laundry.
Note: For safety reasons, the door
remains locked when the water level
or temperature is high, or while the
drum is turning.
Changing the programme
If you have started the wrong
programme by mistake, you can
change it as follows:
1. Press the inicio/pausa (Start/
Reload) í button.
2. Select another programme.
3. Press the inicio/pausa (Start/
Reload) í button. The new
programme starts from the
beginning.
Cancelling the programme
For programmes at high temperature:
1. Press the inicio/pausa (Start/
Reload) í button.
2. To cool down laundry: Select Ù
(Rinse).
3. Press the inicio/pausa (Start/
Reload) í button.
For programmes at low temperature:
1. Press the inicio/pausa (Start/
Reload) í button.
2. Select X (Drain/Empty).
3. Press the inicio/pausa (Start/
Reload) í button.
Programme end during Rinse
Stop
- - - 0 appears in the display panel
and the indicator lamp of the inicio/
pausa (Start/Reload) í button flashes.
Continue the programme by:
■ Pressing the inicio/pausa (Start/
Reload) í button (the laundry will
be spun with the default spin speed
setting
*
) or
■ Selecting a spin speed or setting the
programme selector to X (Drain/
Empty) and then pressing the inicio/
pausa (Start/Reload) í button.
Programme end
“Ÿš appears in the display panel and
the indicator lamp of the inicio/pausa
(Start/Reload) í button goes out.
Removing laundry/switching
off the appliance
1. Turn the programme selector to the
off position. The appliance is
switched off.
2. Open the door and remove the
laundry.
3. Turn off the tap.
Note: Not required for Aqua-Stop
models.
Notes
■ Always wait until the programme
ends, as the appliance could still be
locked.
* depending on the chosen
programme ~ Overview of
programmes on supplementary
sheet for the operating and
installation instructions
