496279
7
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
7
BABY MONITOR EASY CARE Instruction Manual
CONTROLS LAYOUT
Receiver
7. Power on / Battery low indicator
8. Speaker
9. Power On/Off and volume control
10. Channel switch
11. Visual LED alarm
12. DC Jack
Transmitter
1. Power on / Battery low indicator
2. Power On-Off and VOX/continuous switch
3. Channel switch
4. Transmit indicator
5. DC Jack
6. Microphone
2. Operation using the (AC adapter supplied)
The transmitter and the receiver can be operated
o
n AC mains using the supplied 9V AC adapter.
Connect the output plug of adapter to DC jack of
the transmitter (5) and the receiver (12). Connect the
adapter to the mains.
N.B. : The communication range is longest when the
transmitter is operated on AC mains.
OPERATION
A / Transmitter
Switch the transmitter on by setting button 2 to VOX (tripped on voice, recommended) or to ON (continuous
operation). The power on indicator (4) will light up green.
Select either channel 1 or 2 using the Channel Selector Switch 3.
Place the transmitter about 1 m from the cradle, directing the microphone (6) towards the baby.
Under VOX mode, once the built-in microphone picks up any sound from the baby, the transmitter will
automatically switches into transmit mode and the transmit indicator (1) lights up. When the baby stop
making sound, the transmitter will return to standby mode and the transmit indicator goes off.
Under ON (continuous transmission) mode, the transmitter will always transmit no matter the baby is making
any sound or not. This is useful if you want to monitor the slightest sound of the baby. For conventional
supervision, you are advised to use the “VOX” mode.
The condition of the batteries is shown by the indicator (4). When the batteries are flat, the intensity
fades and becomes red.
B / Receiver
Set the power ON/OFF switch (9) to ON position to turn on the unit. The power on indicator (7) will light
up green.
Select the same channel as the emitter using knob 10.
Place the receiver at a reasonable distance away from the transmitter to avoid feedback. Too close a distance
will create a screeching sound.
Once the unit receives a signal from the transmitter, the LED of the visual level meter (11) light up. The louder
the baby’s voice, the more number of LED will be lighted up.
The condition of the batteries is shown by the indicator (7). When the batteries are flat, the intensity fades
and becomes red.
NB : If you hear noises other than your baby's, change to another channel both for the transmitter and receiver.
For more convenience, the receiver
can be carried around using the belt
clip. To remove the clip follow diagram
as shown.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Babymoov-Easy-Care

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Babymoov Easy Care bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Babymoov Easy Care in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info