768615
3
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
3
IMPORTANT -Read these instructions carefully
before use and keep them for future reference.
Your childs safety may be affected if you do not
follow these instructions.
1 From the existin City Select® LUX seat:
Remove the seat from the seat frame by
unsnappin all of the fabric and unfastenin
the velcro® strap around the footwell.
2 Remove the footwell frame from the upper
seat frame by pressin the buttons on both
sides of the footwell and ently pullin until
the pieces separate.
3 Insert the Foot Bar from the Pram Kit into the
seat frame until it clicks into place.
4 Place the Pram within the seat frame so the
top of the seat frame is alined with the top
of the Pram.
NOTE: The top of the seat frame and top
of the Pram are marked “TOP” for your
convenience.
5 Attach the upper U-shaped Pram support rod
around the top section of the seat frame on
both sides.
6 Fasten all snaps around the top portion of the
Pram to the top portion of the seat frame.
7 Attach the lower U-shaped Pram support rod
around the lower section of the seat frame on
both sides.
8 Fasten all snaps around the lower portion of
the Pram to the lower portion of seat frame.
NOTE: When fastenin the snaps, make
sure the fold stop bracket fits underneath
the mountin adapters.
CANOPY - Use your existin seat’s canopy for the
Pram canopy.
9 Snap canopy brackets to both sides of seat
frame.
10 Fasten canopy Velcro® to Velcro® on Pram.
FOOT COVER
11 Fit Foot Cover around lower portion of Pram
and fasten to Velcro® below mountin bracket.
12 Snap Foot Cover.
13 Alin the Pram bracket adapters with the
mountin brackets on your stroller. Press firmly
until the Pram clicks into place.
CARRY STRAPS
14 When not usin the carry straps, use the snaps
to fasten them to the top of the foot cover as
shown.
IMPORTANT -Veuillez lire ces instructions avant
l’utilisation et les arder pour référence future. La
sécurité de votre enfant peut être affectée si vous
ne respectez pas ces instructions.
1 Du sièe présent dans le City Select® LUX
: enlevez le tissu du sièe du cadre en
déboutonnant les boutons-pression et
défaisant les courroies Velcro® autour du
repose-pied.
2 Enlevez le cadre du repose-pied du cadre
supérieur du sièe en appuyant sur les
boutons noirs des deux côtés du repose-pied
et en tirant doucement jusqu’à ce que les
pièces soient séparées.
3 Insérez la barre dancrae du landau dans le
cadre du sièe jusqu’à ce qu’elle s’enclenche
en place.
4 Placez le landau à l’intérieur du cadre du
sièe de manière à ce que le haut du cadre
du sièe soit aliné avec le haut du landau.
REMARQUE : le haut du cadre du sièe et le
haut du landau sont identifiés par le mot «
TOP » pour vous aider.
5 Attachez la tie de soutien en U supérieure
du landau autour de la section supérieure du
cadre du sièe sur les deux côtés.
6 Attachez les boutons-pression tout autour
de la partie supérieure du landau à la partie
supérieure du cadre du sièe.
7 Attachez la tie de soutien en U inférieure
du landau autour de la section inférieure du
cadre du sièe sur les deux côtés.
8 Attachez les boutons-pression tout autour
de la partie inférieure du landau à la partie
inférieure du cadre du sièe.
REMARQUE : lorsque vous attachez les
boutons-pression, veillez à ce que le
support de la butée de pliae soit loé
en dessous des adaptateurs de montae.
CAPOTE - Utilisez la capote de votre sièe
comme capote pour le landau.
9 Attachez les supports de la capote sur
chaque côté du cadre du sièe.
10 Attachez le Velcro® de la capote au Velcr
du landau.
COUVRE-PIED
11 Ajustez le couvre-pied autour de la partie
inférieure du landau et attachez le Velcro® au
support de montae.
12 Attachez le couvre-pied à ce bouton-pression.
13 Alinez les adaptateurs des supports du
landau avec les supports de montae de
votre poussette. Appuyez fermement jusqu’à
ce que le landau s’enclenche en place.
SANGLES DE TRANSPORT
14 Lorsque les sanles de transport ne sont pas
utilisées, utilisez boutons-pression pour les fixer
sur le dessus du couvre-pied comme l’indique le
schéma.
ASSEMBLY INSTRUCTIONS INSTRUCTIONS POUR L’ASSEMBLAGE
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Baby Jogger City Select LUX Pram bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Baby Jogger City Select LUX Pram in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info