606762
6
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
Page 6
TROUBLESHOOTING/SPECIFICATIONS
APPENDIX
4
TECHNICAL SPECIFICATIONS
Item DevIce Parameter SPecIfIcatIon
Camera
Wireless Parameters
2.4 GHz secure digital wireless with 24 transmission channels using Frequency Hop-
ping Spread Spectrum (FHSS) technology
Communication Range
2.4 GHz secure digital wireless at approximately 500 feet (150 meters) open space line
of sight
Camera Resolution 640 x 480
Image Sensor OmniVision OV7725 1/4” CMOS
IR LED’s 25
IR Cut Filter Automatic for daytime true color
Weather Resistant Rating IP-66
Night Vision 60’ (18m)
Operating Temperature 14 °F to 122 °F (-10 °C to 50°C)
Operating Voltage DC 5V / 1A
Current Consumption IR LED ON :550mA ; IR LED OFF :350mA
Dimensions
4.2”D (106mm) x 2.4”W (61mm) x 2.7”H (68mm) camera barrel only
4.8”D (122mm) x 2.8”W (71mm) x 8.0”H (203mm) w/stand and antenna
SPECIFICATIONS
error PoSSIble cauSe SolutIonS
System is not receiving
power or is not powering up
Cable from power adapter is loose or is un-
plugged. No power at electrical outlet.
• Confirm that all cables are connected correctly.
• Confirm that the power adapter is securely connected to the back of the unit.
• Confirm power is on at electrical outlet.
There is no picture on
selected channels/cam-
era picture is not being
displayed
Camera out of range • Locate camera closer to receiver.
Camera not “Paired” • Connect camera through Camera Pairing menu.
Signal is blocked
• If possible, remove major obstacles in between the camera and the receiver. Or, relocate
the camera to another location.
The power supply for the camera is not plugged in • Confirm camera power supply is connected correctly.
No power being received at the electrical outlet • Confirm power is on at electrical outlet
At night, only white appears
on the screen
The camera’s infra-red LEDs shine invisible light
that reflects of surfaces such as glass causing
white light
• Place the camera on the other side of windows to try to improve the night vision or place
in a well lit area.
A black and white image
appears at night
This is normal operation for night vision • No action required.
Poor image quality Interference
• Place the camera and/or receiver antenna at a new angle or readjust its position to make
an improvement.
• Remove obstacles between the camera and receiver that might affect the signal (e.g.,
furniture, cabinets, and walls.)
• Relocate the camera closer to the receiver.
Low or unstable signal
Antenna direction is limited • Adjust the camera antenna and receiver position
Signal has been blocked
• If possible, remove major obstacles in between the camera and receiver. Or, relocate the
camera to another location.
Strong radio signal nearby • Keep WIFI router away from the camera and/or receiver.
Strong electromagnetic interference nearby
• Keep active appliances such as hair dryers, heat fans, air conditioners, water pumps, or
microwave ovens away from the camera and/or receiver.
Audio Feedback Camera and receiver are too close
• The camera has a high sensitivity microphone. Keep the camera at least 10 feet away
from the receiver. If the camera must be within 10 feet of the receiver, keep the volume
down.
TROUBLE
SHOOTING
TROUBLESHOOTING
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BRK DWH-400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BRK DWH-400 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info