606732
53
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
Page 53
APPENDIX
FAQ’s
If your problem is not listed below, please call our toll-free
number for more support. Tech Services: 800-323-9005.
Question: Why does DVR not work after
starting? Why did the DVR stop working?
Answer:
Check that the power adapter is
plugged into the DVR properly
Check the power source and all power cord
connections are properly connected
Make sure the power on-off switch on
the back of the DVR unit is on
Question: Why does the DVR reboot automatically?
Or stop for several minutes after starting?
Answer:
Check the supply voltage to be sure it is stable
Bad track on hard drive or the hard drive is bad
Instability of the front-end video signal
High temperature, too much dust, bad
DVR operating environment
Question: Why is there no video output
on single, multi or all channels?
Answer:
Check if the camera adaptor is properly connected
Check the cable for connecting video input/
output in the back panel of DVR
Insert the video source directly into the display
device and check if they are causing the problem.
Check the brightness of the picture and bring
it back to its original default setting
No video input signal or too weak
Question: What is the meaning of?
Answer:
Question: Why does DVR have problems
with real-time images, such as bad image
color or serious brightness distortion?
Answer:
If PAL and NTSC are not correctly selected, the images
will be in black and white and possibly a rolling screen.
DVR is not compatible with monitor
The video transmission distance (cable run) is too long
Adjust the DVR color settings
Question: Why is there no audio sound when monitoring?
Answer:
Check sound box or speaker functions.
Also check possible short circuit.
Audio source may be connected to the video
channel. You can click to full-screen to check.
The hardware of DVR is defective
Cameras are not audio capable
Speakers need to have an amplifier
Channel being monitored is not
connected to an audio camera
Volume regulate is turned down
Question: Why is there no audio when playing back?
Answer:
Check to see that the audio settings
for the channels are correct.
Audio is off in record menu
Question: Why is my system time not correct?
Answer:
Wrong setting or user did not click OK to confirm
Question: Why doesn’t motion detection work?
Answer:
The setting of motion detection area is not correct
Sensitivity is too low
Question: Why do I have no disc or disc mount error?
Answer:
The data being downloaded exceeds
the capacity of backup device
The backup device is incompatible
The backup device is damaged
Question: Why doesn’t the Remote Control work?
Answer:
The remote control is too far from the DVR
Remote control batteries are dead or low
Remote control is damaged, check by
using the control on the DVR
Question: Why can’t I log in over the Internet?
Answer:
Check the network to see if it is connected.
Check if LINK or 100M LED is displayed normally
on the panel; use ping xxx.xxx.xxx.xxx (DVR IP)
to check if the Internet is linked properly.
Make sure you are running Windows 7, Vista or XP
operating system and Internet Explorer 6.0 - 8.0
Indicates the channel is recording.
Channel is capable of providing audio.
Motion detected.
Indicates motion record enabled.
Indicates a remote log in session is in prog-
ress.
FAQ
,
s
53

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BRK DVRAD1610 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BRK DVRAD1610 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info