566930
7
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
z Repeat/intro/random mode
z Press the repeat/intro/random button (17) during playback, you can select the difference modes as followed:-
(1) repeat 1
(2) repeat all track (3) intro play (4) random (5) off mode
Play mode indicator on LCD display
Repeat single track
Repeat all tracks
all
Intro play mode Intro
Random mode Random
Off mode -----------------
z Repeat play
You can listen the desired tracks or all tracks repeatedly by this function.
z Intro play
You can listen the beginning (10 seconds) of each file by this function & save time to when searching the desire song
z Random play
You can listen to all the tracks in a random order by using this function
Tracks programming (by remote control)
Up to 10 tracks can be programmed for MP3 file and play in any order. Before use, be sure the system is at stop mode
before programming:-
1. Set in USB/SD mode & set at stop mode.
2. Press the “Program” button, “ Prog “ will appear on LCD display (13). Moreover, it will indicate program no. and
digits for track no. to be programmed.
3. Select a desired track by pressing Skip up
(15) or down buttons (5).
4. Press the “ Program ” button to store the trace into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press “ Play/Pause/Stop ” button (4) to play the
MP3 file in assigned order.
7. To cancel the programmed file, stop playback the unit and then press “Program” button on remote control until
“ Prog “ has disappear on LCD display (13).
Encoding of Phono into MP3 file
The system is able to encode the phono to MP3 format and recording at memory media with USB connecting port or
SD/MMC card.
A) Phono encoding
1) Insert the USB or SD media to the main unit refer the “Playback of MP3 song via USB storage media or memory
card section”.
2) Set the function button to “ Phono “ mode and then press the “
Rec “ button (7) directly.
3) The LCD display will show “ or “ “ & “ “ and flashing, and the system is starting the encoding
mode after few seconds,.
4) Start playback at phono for the track which you want to recorded.
5) After finish of recoding, press the “
Rec “ button (7) until the LCD stop flashing and return to “ phono “ mode.
Remark:-
- The recording speed is 1:1 and according to the actual playing time of the phono
- The system will create a folder and then store the encoded track in it.
- The recording format is set at – MP3
bit rate : 128 kbps, sampling rate : 44.1khz
- No song title will be recorded during encoding mode.
- If both media (USB/SD) inserted to the device, the device will on default record to USB media when encoding
from phono.
- Because this device has USB as default recording device at USB mode encode, please do not insert the USB
media during encoding to SD card, it causes the device does to not function properly.
B) track separation (by remote handset)
You can divide the music into tracks by pressing the “ “ (track separation) button once at the remote control
during encoding from phono to USB/SD, the system will generate a new track and continue the recording. The text
“ phono “ at LCD display will flash one time, it mean the device has created a new track successfully.
EN-3
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Axxion TT-31 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Axxion TT-31 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Axxion TT-31

Axxion TT-31 Gebruiksaanwijzing - Nederlands - 10 pagina's

Axxion TT-31 Gebruiksaanwijzing - Deutsch - 9 pagina's

Axxion TT-31 Gebruiksaanwijzing - Français - 9 pagina's

Axxion TT-31 Gebruiksaanwijzing - Espanõl - 9 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info