CLASS 1 LASER PRODUCT
This product contains a low power laser device.
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
CAUTION
INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM
Warning: Do not touch the lens.
DO NOT THROW BATTERIES IN FIRE !
ATTENTION : To reduce the risk of electric
shock, do not remove the cover. There are
no user serviceable parts inside the unit.
Refer all servicing to qualied personnel.
The exclamation point within the
triangle is a warning sign alerting
the user of important instructions
accompanying the product.
T h e l i g h t e n i n g f l a s h w i t h
arrowhead symbol within the triangle
is a warning sign alerting the user of
"dangerous voltage" inside the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
In case of malfunction due to electrostatic discharge, the apparatus has to be reset by disconnecting it from mains supply.
THE MARKING PLATE IS LOCATED ON THE BOTTOM OF ENCLOSURE OF THE APPARATUS.
PRECAUTIONS
Follow the advice below for safe and appropriate operations.
Follow the advice below for safe and appropriate operations.
ON PLACEMENT
• Do not use the unit in places which are extremely hot,
cold, dusty, or humid.
• Place the unit on a at and even surface.
• Do not restrict the air ow of the unit by placing it in a
place with poor air ow, by covering it with a cloth,
or by placing it on a carpet.
ON SAFETY
• When connecting and disconnecting the AC cord,
grip the plug and not the cord itself. Pulling the cord may
damage it and create hazard.
• When you are not going to use the unit for a long period
of time, disconnect the AC power cord.
ON AC VOLTAGE
• Before use, check that the rated voltage of your unit
matches your local voltage.
SYSTEM CONNECTIONS
1. SPEAKER CONNECTING
Connect the black wire to the (-) terminal.
The grey wire to the (+) terminal.
2. AC POWER CONNECTING
Before use, check the rated voltage (indicated at the rear
of unit) of your system to match your local voltage.
CAUTION :
• Make sure the SPEAKER PANEL are well connected
before plugging the AC power cord into an AC outlet.
• Power is fed to the unit even when it is in standby.
3. FM WIRE ANTENNA
ON CONDENSATION
• When left in a heated room where it is warm and damp,
water droplets or condensation may form inside the
CD player.
• When there is condensation inside the unit, the unit may not
function normally.
• Let it stand for 1 to 2 hours before turning the power on, or
gradually heat the room up and dry the unit before use.
* Ensure a minimum distance of 5 cm around the apparatus
for sufcient ventilation.
* Ensure that the ventilation is not impeded by covering the
ventilation openings with items, such as newspapers,
table-cloths, curtains, etc..
* Do not place naked ame sources, such as lighted candles
on the apparatus.
* Take attention to the environmental aspects of battery
disposal.
* Use the apparatus only in moderate climates (not in tropical
climates).
* Do not expose the apparatus to dripping or splashing.
* Do not place objects lled with liquids, such as vases, on the
apparatus.
• Mains plug is used as the disconnection device. It shall
remain readily operable and should not be obstructed during
intended use. To be completely disconnected the apparatus
from supply mains, the mains plug of the apparatus shall
be disconnected from the mains socket outlet completely.
Should any trouble occur, disconnect the AC power cord and
refer servicing to qualied personnel.
WARNING: TO PREVENT THE RISK OF FIRE OR ELECTRICAL SHOCK , DO NOT
EXPOSE THESE APPLIANCES TO RAIN OR OTHER MOISTURE.
EXPLANATION OF GRAPHICAL SYMBOLS:
WARNING
GB 1
