500947
16
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
- Operation -
16
4 Operation
4.1 The baby unit
Position the baby unit near to the baby. Please observe the minimum distance of one metre. For best
transmission, the integral microphone (6) should be pointing towards the child.
Now select one of the two channels A or B with the channel switch (3).The parent and baby units must
be set to the same channel.
Switch on the baby unit by moving the slide switch (1) to the ON position. The baby unit is now ready for
use. In the ON position, the baby unit is always in operation. The in-built microphone will continuously
transmit any noises made by your child.
You can switch the night light on and off by means of the Night light button (5).
In battery mode, the indicator light (4) shows green when there is sufficient battery capacity. You should
change the batteries if the indicator light shows red. When used with the power supply, the indicator light
always shows red.
To switch off the baby unit, move the slide switch (1) to the OFF position.
Reducing radiation/Battery saving mode
Move the slide switch (1) to the AUTO position. With this setting, the baby unit will only transmit when
noises are received. This reduces radiation, as the baby unit will only transmit when the baby makes a
noise. Furthermore, in battery mode, the life of the batteries will be increased.
Note:
Check that both units are working properly each time before using.
When using the AUTO function, check whether the noises made by the baby are loud enough to initiate
a transmission.
4.2 The parent unit
Position the parent unit near to you. The parent unit has a rotating belt clip. If the belt clip is turned
downwards, you can place the parent unit on a flat surface. If the belt clip is turned upwards, you can fix
the parent unit to your belt and thus have it with you at all times. You can also hang up the parent unit in
any convenient place using the clip.
Now select one of the two channels A or B with the channel switch (8).The parent and baby units must
be set to the same channel. Switch on the parent unit by turning the slide switch (7) to the ON position.
The parent unit is now ready for use. Set the required volume with the slide switch (7). The volume
becomes louder in the ON direction and reduces in the OFF direction.
In battery mode, the indicator light (10) shows green when there is sufficient battery capacity. You should
change the batteries if the indicator light shows red. When used with the power supply, the indicator light
always shows red.
To switch off the parent unit, move the slide switch (7) to the OFF position.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Audioline Baby Care 1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Audioline Baby Care 1 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info