309039
32
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
Page 14
The Delayed Start MenuThe Delayed Start Menu
This menu lets you set a delayed start from 1 to 12
hours. This means you can set the washer to start at
the most convenient time for you, such as an hour before
you arrive home from work. This feature is also useful
in areas where utility companies offer discount rates
during certain hours.
Select time
for delayed start
< - + >
P1
Menu Enter
0
1. Use the Arrow buttons to increase or decrease the
delay time. (The numbers indicate hours.)
2. When the number of hours you want to delay starting
the machine displays, press ENTER. The LED will
display the delay start time.
Press MENU to advance to the next menu.
The Options MenuThe Options Menu
This menu lets you set several options. Only the options
available with the wash program you selected will display.
(See ”The Program Menu” table on page 11.)
rpm
1600
0
Menu Enter
Select
options
Pre-soak
< Off >
P1
1. On this menu, you press ENTER to advance through
the options, rather than pressing MENU.
2. Press an Arrow button to toggle between Off and On.
3. When your preference displays, press ENTER. The
LED will display the new options. Continue to press
ENTER until the LED displays your new program.
RESTORING A PRESETRESTORING A PRESET
PROGRAMPROGRAM
To restore a preset program to its original settings,
simply press the button for the preset program you want
to restore and hold it down while your press ENTER.
The program will revert to its original settings.
To change the language, follow the steps below:
1. Turn the machine off then on again.
2. Press ENTER five times in succession then press
P1 five times. (This must be done within 15 seconds.)
3. When the Language menu displays, press an Arrow
button to advance through the menu to the desired
language.
4. Once the correct language displays, press ENTER
to program the LED window to display the language
you selected.
CHANGING CHANGING THE THE TEMPERATEMPERATURETURE
READOUT ON THE LED WINDOWREADOUT ON THE LED WINDOW
FROM CELSIUS TO FAHRENHEITFROM CELSIUS TO FAHRENHEIT
You can change the temperature readout on the LED
window from Celsius to Fahrenheit and vice versa. To
do this follow the steps below:
1. Turn the machine off then on again.
2. Press ENTER five times in succession then press
P2 five times. (This must be done within 15 seconds.)
3. When the Temperature menu displays, press an
Arrow button to toggle between Fahrenheit and
Celsius.
4. When your preference displays, press ENTER to
program the LED window to display the temperature
reading you selected.
CHILD-SAFE STCHILD-SAFE STARART (W640/W660)T (W640/W660)
As a safety measure, you can program the W640 and
W660 not to start unless the START button is held down
for three seconds. To do this, follow the steps below:
1. Turn the machine off then on.
2. Press ENTER five times, then press P3 five times.
(This must be done within 15 seconds.)
3. “Delayed start” displays with “0” flashing in the lower
right corner. Press the right Arrow button to toggle
the display to “3.”
Child-Safe Menu ButtonChild-Safe Menu Button
Please note that when you set the child-safe Start button,
the Menu button is automatically programmed to delay
for three seconds before it becomes active. This prevents
a child from accidentally changing the program settings.
When you want to change a program, press the Menu
button for three seconds to activate the menus. The
Menu button will work normally (without the 3-second
delay) until you have completed your changes. If it is not
pressed for two minutes, it will automatically revert back
to the child-safe mode.
English
French
Spanish
Portuguese
Italian
German
Swedish
Danish
Norwegian
Netherlands
Finnish
CHANGING CHANGING THE LANGUTHE LANGUAAGEGE
ON THE LED WINDOWON THE LED WINDOW
There are eleven languages available for the LED
window:
NOTE:
If you change the P3 program then decide to
restore its original settings, after pressing P3
and ENTER, you must go into the Options
menu (see page 14) and turn off Short Spin.
32

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Asko-w-620

Zoeken resetten

  • De handleiding van 36 pagina's is NIET de handleiding van een W620! Gesteld op 8-9-2016 om 21:00

    Reageer op deze vraag Misbruik melden
    • Geachte heer/mevrouw,

      Vervelend te vernemen dat u de verkeerde gebruiksaanwijzing hebt ontvangen/gedownload. Uiteraard kunnen wij u helpen met het verzenden van de juiste. Mogelijk dat u ons per mail wilt benaderen via service@alluance.nl, zodat wij u hiermee verder kunnen helpen.

      Uiteraard mag u ons ook telefonisch benaderen via 038-38515850.

      Wij staan u graag te woord,

      Met vriendelijke groeten,

      Aftersales-team Alluance, Geantwoord op 9-9-2016 om 11:17

      Waardeer dit antwoord Misbruik melden
  • Telkens storing met machine geeft dan F 10. Aan, speld verwijderd zit niks meer in maar blijft stoppen met programma en geeft weer F10 Gesteld op 27-7-2016 om 10:30

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Asko w 620 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Asko w 620 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Asko w 620

Asko w 620 Gebruiksaanwijzing - English - 2 pagina's

Asko w 620 Gebruiksaanwijzing - English - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info