665616
7
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
V 09/16
15
Choose a suitable place to position the radiator, considering the general safety warnings given in the first part of this
manual. Only use this radiator in an upright position.
Insert the plug into the electrical socket, ensuring that voltage is compliant with that specified on the convector data plate.
Select the desired temperature using the thermostat, turning
this knob clockwise: min. corresponds to minimum
temperature and max. to maximum level. The convector will
start operating only if the thermostat is above the minimum
temperature.
Then choose the power level desired through the
power selector.
Room thermostat
min = (min. temperature)
max = (max. temperature)
Power selector
0 = OFF
I = 800 W (min.) (9) – 1000 W (11)
II = 1200 W (med.)(9) - 1500 W (11)
III = 2000 W (max.)(9) - 2500 W (11)
Room temperature can be regulated by rotating the thermostat clockwise to increase or anticlockwise to
decrease temperature.
When turning the panel on, we recommend turning the thermostat knob to maximum: then, when a pleasant room
temperature has been obtained, turn the thermostat dial anticlockwise until the light of the active switch goes out. This
way the panel will maintain that room temperature constant.
To turn the convector off completely turn the power selector back to 0 and then rotate the thermostat dial anticlockwise
until it clicks off. Unplug the appliance if it will not be used for a while.
OVERHEATING SAFETY DEVICE
In the event of overheating, an additional fitted safety thermostat protects the heater against overheating and switches it
off automatically.
If the device switches itself off, disconnect the main plug from the socket.
The heater is ready for use after a short cooling-off phase (approx. 15 minutes). Plug the mains back into the socket.
If this repeats, first check that the thermostat switch is set correctly or if an object hinders the heating operation.
HOW TO CLEAN THE RADIATOR
Always unplug and leave the radiator to cool before cleaning.
Use a damp cloth to clean the radiator exterior and remove dust. Leave the casing to dry before using the convector
again.
Do not allow water to enter the radiator.
Do not use benzene, solvents or abrasive compounds to clean the radiator, as these may damage the casing.
Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
Ensure that the radiator is dry before inserting the plug.
Do not use metal tools to clean the convector radiator. Any metal fragments that may detach may come into contact
with the panel’s electrical components and cause a short-circuit.
In the event of malfunctions or damages, always contact an authorised service centre.
STORAGE OF RADIATOR
If the radiator is not used for prolonged periods, it must be stored together with this manual in its original packaging, in a
cool and dry place. Never put the appliance away when still hot. Always wait for it to cool down.
HOW TO USE THE RADIATOR
1 2
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Argo Silence 11 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Argo Silence 11 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Argo Silence 11

Argo Silence 11 Gebruiksaanwijzing - Deutsch - 8 pagina's

Argo Silence 11 Gebruiksaanwijzing - Français - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info