665613
8
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
V 09/16
17
(220-240V/50Hz).
Turn the side dial of the thermostat to the maximum (max. temperature).
Now choose the power level desired by using the switches as appropriate:
If both switches are in the ‘0’ position, i.e. off, the panel is off.
By turning the switches to ‘I’ or ‘II’ or ‘III’, the panel turns on and operates at ‘minimum’ or ‘medium’ or ‘maximum'
level. The red switch in the on position, lights up.
.
Room temperature can be regulated by rotating the thermostat clockwise to increase or anticlockwise to
decrease temperature.
When turning the panel on, we recommend turning the thermostat dial to maximum: then, when a pleasant room
temperature has been obtained, turn the thermostat dial anticlockwise until the light of the active switch goes out. This
way the panel will maintain that room temperature constant.
OVERHEATING SAFETY DEVICE
In the event of overheating, the panel protection system automatically disables the heating elements, turning the
appliance off.
To understand whether it has turned off due to intervention by this system, rotate the thermostat switch to maximum to
verify that the thermostat has not simply turned the convector off due to having reached the set temperature.
Should the appliance not return to normal operation due to the safety device having intervened:
1. turn the panel off;
2. remove any cause of overheating (e.g. obstacles on the air outlet or intake grille, dust deposits in the appliance, etc.
);
3. leave the appliance to cool for 15 – 20 minutes;
4. turn the panel on again.
CLEANING THE PANEL HEATER
Always unplug and leave the panel to cool before cleaning.
Use a damp cloth to clean the panel exterior and remove dust. Leave the casing to dry before using the appliance
again.
Do not allow water to enter the panel.
Do not use benzene, solvents or abrasive compounds to clean the panel, as these may damage the casing.
Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
Ensure that the panel is dry before inserting the plug.
Do not use metal tools to clean the panel. Any metal fragments that may detach may come into contact with the
panel’s electrical components and cause a short-circuit.
In the event of malfunctions or damages, always contact an authorised service centre.
By setting the left-hand switch to
the ‘I’ position and leaving the
right-hand switch set to ‘0’, minimum
power is selected: 500 W
By setting both switches to
the ‘III’ position, maximum
power is selected: 1500 W
By setting the right-hand switch to
the ‘II’ position and leaving the left-
hand switch set to ‘0’, medium power
is selected: 1000 W
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Argo Hi Floor Ray bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Argo Hi Floor Ray in de taal/talen: Engels als bijlage per email.

De handleiding is 1,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Argo Hi Floor Ray

Argo Hi Floor Ray Gebruiksaanwijzing - Deutsch - 9 pagina's

Argo Hi Floor Ray Gebruiksaanwijzing - Français - 9 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info