805091
51
Verklein
Vergroot
Pagina terug
1/53
Pagina verder
V 11/21 106
B. Electrically isolate the system.
C. Before attempting the procedure, make sure that:
• mechanical handling equipment is available, if required, for handling the refrigerant cylinders;
• all personal protective equipment is available and used correctly;
• the recovery process is supervised at all times by a competent person;
• Recovery equipment and cylinders comply with appropriate standards.
D. If possible, drain the refrigerant system.
E. If vacuum is not possible, make a manifold so that the refrigerant can be removed from the various parts of the system.
F. Make sure the cylinder is placed on the scale before recovery takes place.
G. Start the recovery machine and operate according to the manufacturer's instructions
H. Do not overfill the cylinders. (Not more than 80% by volume of liquid charge).
I. Do not exceed, even temporarily, the maximum working pressure of the cylinder.
J. When the cylinders have been filled correctly and the process is complete, ensure that the cylinders and equipment are
promptly removed from the site and that all isolation valves on the equipment are closed.
K. Recovered refrigerant should not be charged to another refrigeration system unless it has been cleaned and checked.
l) Labeling
The equipment must be labeled indicating that it has been shut down and drained of refrigerant. The label must be dated
and signed. For appliances containing flammable refrigerants, make sure there are labels on the appliance indicating that
the appliance contains flammable refrigerant.
Recovery
When removing refrigerant from a system, whether for maintenance or decommissioning,
It is recommended that all refrigerants be removed safely.
When transferring refrigerant to cylinders, ensure that only appropriate refrigerant recovery cylinders are used. Make sure
the correct number of cylinders are available to maintain full system charge. All cylinders to be used are designated for the
recovered refrigerant and labeled for that refrigerant (i.e. special cylinders for recovering refrigerant). The cylinders must
be complete with pressure relief valve and relative shut-off valves in good working order. Empty recovery cylinders are
evacuated and, if possible, cooled before recovery takes place.
If compressors or compressor oils need to be removed, make sure they have been evacuated to an acceptable level to
ensure that flammable refrigerant does not remain within the lubricant. The evacuation process must be carried out before
returning the compressor to suppliers. To speed up this process, only electrical heating of the compressor body must be
used. When oil is drained from a system, it must be done safely
Work procedure
The work must be carried out according to a controlled procedure in order to minimize the risk of the presence of flammable
gas or vapor during the execution of the work.
2. General work area
All maintenance personnel and others working in the local area should be educated on the nature of the work being
performed. Work in confined spaces must be avoided. The area around the work area must be sectioned. Ensure that
conditions within the area have been secured by the control of flammable material.
3. No ignition sources
No person carrying out work in relation to a refrigeration system involving exposure to piping must use sources of ignition
in a way that creates the risk of fire or explosion. All possible sources of ignition, including cigarette smoke, must be kept
sufficiently far from the place of installation, repair, removal and disposal, during which the refrigerant may possibly be
released into the surrounding space. Before starting work, the area around the equipment must be checked to ensure that
there is no risk of flammability or ignition hazards. "No smoking" signs must be displayed.
51

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Argo Ecolight Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Argo Ecolight Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 3,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Argo Ecolight Plus

Argo Ecolight Plus Gebruiksaanwijzing - Deutsch - 56 pagina's

Argo Ecolight Plus Gebruiksaanwijzing - Français - 55 pagina's

Argo Ecolight Plus Gebruiksaanwijzing - Italiano - 55 pagina's

Argo Ecolight Plus Gebruiksaanwijzing - Espanõl - 55 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info