724566
13
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
13
During the heating mode, the air conditioner will now operate with the new calibration of the air probe.
Nota: this setting has no effect when I Feel is selected. In this case the air conditioner will operate with the remote
control air probe.
ATM mode setting
It is possible to set the air conditioner to operate automatically without a remote control so that it maintains the room
temperature between 18°C and 24°C. A typical application is that of installation within ATMs (cash machine) of banks. In
this mode it is not necessary to set the desired temperature or operating mode, but it will all be managed automatically
by the air conditioner.
To activate this mode, follow the procedure below:
1. Press and hold the “FILTER” button (symbol) for more than 7 seconds. A number will appear on the remote control
screen.
2. Press the + or - keys until the number 11 is displayed.
3. Hold down the “FILTER” button for more than 7 seconds and release it by pointing the remote control at the air
conditioning receiver. An acoustic confirmation of 4 consecutive “beeps” will confirm the successful setting.
Nota: 60 seconds after activating ATM mode the remote control is disabled.
To disable ATM mode, follow the procedure below:
1. Disconnect the power of the air conditioner
2. Wait for 1 minute
3. Re-connect power to the air conditioner
4. Within 60 seconds (before the remote control is disabled again), repeat the procedure above. An acoustic confirmation
of 2 consecutive “beeps” will confirm that the original setting has been reset.
Display setting : Celsius degrees / Fahrenheit degrees
The remote control is set by default to display the temperature expressed in Celsius degrees.
To change the temperature display from Celsius degrees to Fahrenheit degrees (and vice versa), follow the procedure
below:
1. Hold down the “FILTER” button for more than 7 seconds and release it. A number will appear on the remote control
screen.
2. Press the + or - keys until the number 77 is displayed.
3. Hold down the “FILTER” button for more than 7 seconds and release it. The temperature will now be displayed on
the remote control screen with the new setting.
Note: if you remove the batteries from the remote control, the default display is reset.
Factory settings’ reset
To reset the factory settings, follow the procedure below:
1. Hold down the “FILTER” button for more than 7 seconds and release it. A number will appear on the remote control
screen.
2. Press the + or - keys until the number 0 is displayed.
3. Hold down the “FILTER” button for more than 7 seconds and release it by pointing the remote control at the air
conditioning receiver. An acoustic confirmation of 2 consecutive “beeps” will confirm the correct reset of the factory
settings.
Note: to reset the temperature display in Celsius degrees, remove and replace the batteries of the remote control unit.
EN
3742551750-I-AR-DD.indd 13 11/09/2019 13:41:38
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Argo DD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Argo DD in de taal/talen: Engels als bijlage per email.

De handleiding is 1.75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Argo DD

Argo DD Installatiehandleiding - Deutsch - 16 pagina's

Argo DD Gebruiksaanwijzing - Deutsch - 16 pagina's

Argo DD Gebruiksaanwijzing - English - 15 pagina's

Argo DD Installatiehandleiding - Français - 16 pagina's

Argo DD Gebruiksaanwijzing - Français - 16 pagina's

Argo DD Gebruiksaanwijzing - Italiano - 16 pagina's

Argo DD Installatiehandleiding - Italiano - 16 pagina's

Argo DD Gebruiksaanwijzing - Português - 16 pagina's

Argo DD Installatiehandleiding - Português - 16 pagina's

Argo DD Gebruiksaanwijzing - Espanõl - 16 pagina's

Argo DD Installatiehandleiding - Espanõl - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info