495975
6
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
PROGRAMMER KNOB “STOP”:
The stop function resets the washing machine. If, for any reason, you want to change the wash
programme or add more washing to the load during the wash cycle, simply place the
programmer knob in position “STOP” (the button will start to flash). Then re-position the
knob on the new programme and press the “START” button. At this point, before the
programme restarts, any water in the machine will be drained
N.B. after having caried out this operation, check for the presence of detergent in the
appropriate dispensers and add more if necessary.
Warning!! only use this function if strictly necessary and then only if the programme to reset has
been running for a few minutes. Before opening the door after a reset, wait 2 minutes for the locking
mechanism to release.
STOP
SM1029
EXTRA RINSE:
The washing machine has been designed to reduce water consumption to a
minimum. In very soft water areas, or in the case where detergent residues are
noticed at the end of the wash cycle, pressing this button will add one more rinse
to the programme.
GB
USING THE WASHING MACHINE
OPTIONAL FUNCTIONS
PREWASH:
Press this button and the machine will perform a prewash at the maximum temperature of
40°C.
This function can only be used on the “COTTON” and “SYNTHETICS” programmes.
N.B. When this option is used, the detergent must also be added to the appropriate prewash
compartment..
MONITORING THE WASH:
The figure alongside shows the 5 main functions of a PREWASH, WASH, RINSE,
SPIN, END wash cycle:
Each of these functions will be highlighted during the wash by a led.
In this way, the user is constantly aware of the progress of the wash.
After the spin phase, the corresponding led will stay lit for approximately 2 minutes.
This is the time lapse necessary for the door release mechanism to work, after which
the END led will light up.
At this point, press the On/Off button, open the door and remove the washing.
START BUTTON:
After selecting the required programme, press this button to start the wash cycle Button
(L) will light up to indicate the wash cycle has started.
L
NB. The use of this function depends on the type of programme selected. Consequently, if the
wash programme does not include this function, the button cannot be enabled (see PROGRAMME
TABLE”).
6
PREWASH
WASH
RINSE
SPIN
END
ON/OFF
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ardo AE1400X bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ardo AE1400X in de taal/talen: Engels, Italiaans, Pools als bijlage per email.

De handleiding is 1,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info