Important safety instructions
This product is designed and manufactured to
meet strict quality and safety standards. However,
you should be aware of the following installation
and operation precautions.
1. Take heed of warnings and instructions
You should read all the safety and operating
instructions before operating this appliance. Retain
this handbook for future reference and adhere to
all warnings in the handbook or on the appliance.
2. Water and moisture
The presence of electricity near water can be
dangerous. Do not use the appliance near water –
for example next to a bathtub, washbowl, kitchen
sink, in a wet basement or near a swimming pool,
etc.
3. Object or liquid entry
Take care that objects do not fall and liquids
are not spilled into the enclosure through any
openings. Liquid-lled objects such as vases
should not be placed on the equipment.
4. Ventilation
Do not place the equipment on a bed, sofa, rug or
similar soft surface, or in an enclosed bookcase
or cabinet, since ventilation may be impeded. We
recommend a minimum distance of 50mm around
the sides and top of the appliance to provide
adequate ventilation.
5. Heat
Locate the appliance away from naked ames
or heat producing equipment such as radiators,
stoves or other appliances (including other
ampliers) that produce heat.
6. Climate
The appliance has been designed for use in
moderate climates.
7. Racks and stands
Only use a rack or stand that is recommended for
use with audio equipment. If the equipment is on
a portable rack it should be moved with great care,
to avoid overturning the combination.
8. Cleaning
Unplug the unit from the mains supply before
cleaning.
The case should normally only require a wipe
with a soft, damp, lint-free cloth. Do not use paint
thinners or other chemical solvents for cleaning.
We do not advise the use of furniture cleaning
sprays or polishes as they can cause indelible
white marks if the unit is subsequently wiped with
a damp cloth.
9. Power sources
Only connect the appliance to a power supply of
the type described in the operating instructions or
as marked on the appliance.
This is a Class 1 device and must be earthed.
The primary method of isolating Solo from the
mains supply is to use the switch on the rear of
Solo. Solo must be installed in manner that makes
disconnection possible.
10. Power-cord protection
Power supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords and plugs, and the point where
they exit from the appliance.
11. Grounding
Ensure that the grounding means of the appliance
is not defeated.
12. Power lines
Locate any outdoor antenna/aerial away from
power lines.
13. Non-use periods
If the unit has a stand-by function, a small amount
of current will continue to ow into the equipment
in this mode. Unplug the power cord of the
appliance from the outlet if left unused for a long
period of time.
14. Abnormal smell
If an abnormal smell or smoke is detected from
the appliance, turn the power off immediately and
unplug the unit from the wall outlet. Contact your
dealer immediately.
15. Servicing
You should not attempt to service the appliance
beyond that described in this handbook. All other
servicing should be referred to qualied service
personnel.
16. Damage requiring service
The appliance should be serviced by qualied
service personnel when:
A. the power-supply cord or the plug has been
damaged, or
B. objects have fallen, or liquid has spilled into
the appliance, or
C. the appliance has been exposed to rain, or
D. the appliance does not appear to operate
normally or exhibits a marked change in
performance, or
E. the appliance has been dropped or the
enclosure damaged.
17. Speaker connections
Any speakers must be connected to Solo using
Class 2 wire (i.e., no connection to earth should
be made). Failure to observe this precaution may
cause Solo to be damaged.
Safety compliance
This product has been designed to meet the IEC
60065 international electrical safety standard.
