160363
16
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
16
system
menu
Configuring the listening settings
Solo Mini allows you to adjust listening settings to suit
your taste, and to customise various system features.
Use the adjacent diagram to navigate through the items
available.
With the unit switched on (blue light showing), press
MENU on the remote control. Now use the
C
and
B
keys on the remote to move down and up the
settings available. The
{
and
}
keys on the remote
are used to adjust particular settings.
To leave the menu at any time, press
MENU again.
Balance
Balance allows you to increase the volume of one
channel (left or right) relative to the other. Altering the
balance may help to restore the stereo image for an
off-centre listening position.
Bass
This setting increases or decreases the lower frequency
components of your music.
Treble
This setting changes the relative volume of the higher
frequency components of your music.
Sleep Timer
This timer allows you to specify a listening period, after
which the volume fades into the (silent) standby mode.
CD AutoPlay
(Applies only if source is
CD.)
This setting controls the handling of a CD inserted
into the front slot. If enabled, the CD plays immediately;
if disabled, the CD waits for a command from the
remote or top panel.
Prog
(Applies only if source is
CD and a CD is loaded.)
This feature allows you to programme the playing
order of CD tracks. Scroll left or right to highlight any
of the available tracks and press
OK to transfer it to the
playback sequence.
FM Mode
(Applies only if source is
FM.)
In some weak signal areas, switching the FM tuner to
‘Mono’ can be of benet, as mono requires a much
lower signal strength to produce acceptable results. If
the signal strength in your area is good, leave FM Mode
in ‘Stereo’.
DAB Setup
(Applies only if source is
DAB.)
Selecting Scan’ (conrm with
OK) causes Solo Mini to
search for new DAB stations. Found stations are added
automatically to the list of available stations.
Scanning for new stations does not erase stations that
are no longer transmitted – over time, or if you change
location, this may lead to you having stations in your
list that cannot be received. In this case, select ‘Erase
settings’ (conrm with
OK), then perform a new scan.
When the scan is complete, only stations that are
currently available in your area are shown.
Store/Erase Preset
This allows you to store a radio station that you have
tuned in to as a numbered preset (conrm with
OK).
The station can then be retrieved by pressing the
preset number on the remote.
In the same way, you can erase a particular numbered
preset (conrm with
OK).
iPod Option
(Applies to
TAPE input with rLead connected)
This allows you to Enable or Disable control of an iPod
when connected via an Arcam rLead (for rDock, this
feature is automatic).
Treble 0dB
Bass 0dB
Balance 0dB
CB
CB
CB
CB
CB
CB
CB
CB
OK
OK
OK
MENU
OK
CB
iPod Option
Disabled
iPod Option
Enabled
F G
F G
F G
F G
F G
F G
F G
CB
CD AutoPlay
Disabled
CD AutoPlay
Enabled
F G
F G
rLead only
+Preset
+Preset
–Preset
–Preset
Left
Right
‘Power on’ mode
–dB
–dB
+dB
+dB
Only if source is CD
and CD loaded
Only if source is CD
Only if source is
FM
Only if source is
DAB
Only if source is
DAB, FM or AM
Conrm preset
Conrm preset
Scan for available stations
Erase list of stations
16

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Arcam-solo-mini

Zoeken resetten

  • Ik krijg geen signaal voor de digitale radio, het plastic topje van de antenne is afgebroken, zou dat er iets mee te maken hebben? Gesteld op 19-2-2018 om 21:40

    Reageer op deze vraag Misbruik melden
    • Volgens mij werkt DAB niet omdat de digitale radio vrij snel is overgeschakeld naar DAB+. Dan doet de digitale ontvanger helemaal niets meer. Ik heb zelf ook een Arcam solo mini en geen DAB+ ontvangst. Geantwoord op 24-2-2018 om 21:00

      Waardeer dit antwoord Misbruik melden
  • Mijn solo mini is uitgerust met een telescoop antenne. Nu wil ik hem aansluiten op UPC kabel. Kan dat en zo ja, hoe dan? Gesteld op 5-1-2015 om 13:49

    Reageer op deze vraag Misbruik melden
    • Ja, dan kan. Toevallig heb ik dat zelf ook onlangs gedaan. Gevraagd aan mijn dealer. Hij heeft mij daarvoor een simpele verloop opgestuurd: Verloop F>Coax. Geantwoord op 16-1-2015 om 08:23

      Waardeer dit antwoord Misbruik melden
  • Hoe verwijder ik een ingesteld alarm uit de Arcam Solo? Gesteld op 20-7-2014 om 16:52

    Reageer op deze vraag Misbruik melden
    • Via knop menu. Pijltje naar rechts, dan pijltje naar boven. Je ziet nu setting van On naar Off wijzigen. Let op er zijn 4 alarm mogelijkheden. Deze moeten allemaal uit staan. Van de ene naar de andere alarm setting gaan doe je door op ALM te gaan staan en met het pijltje Op of Neer te springen.
      Geantwoord op 30-8-2014 om 10:42

      Waardeer dit antwoord (1) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Arcam solo mini bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Arcam solo mini in de taal/talen: Engels als bijlage per email.

De handleiding is 0,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Arcam solo mini

Arcam solo mini Gebruiksaanwijzing - Nederlands, Deutsch, Français - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info