670185
3
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
CONCEPT1 RS232 COMMUNICATION
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM
Operating Settings
MSCLVL is the music level. It can be OFF or a value between -79 and 0. If set at -80, it will be ”OFF”. If both
MULTIZONE and ZONELINK are ON, the corresponding zone needs to be specied.
MICLVL is the microphone level. It can be OFF or a value between -79 and 0. If set at -80, it will be ”OFF”. If
MULTIZONE is ON, the corresponding zone needs to be specied.
MAXMSCLVL is the maximum music level. If the music level is adjusted above the maximum, it will be changed to
the maximum value. In case both MULTIZONE and ZONELINK are ON, there sll are 2 dierent values possible for
zone 1 and zone 2. The dierence between those 2 levels will determine the oset between the volumes of both
zones. The maximum dierence in this mode is 40. Example:
SET MAXMSCLVL ZONE1 -16<CR>
SET MAXMSCLVL ZONE2 -10<CR>
Now, the volume can be adjusted between OFF and -10. The level in zone 1 will always be 6 dB lower than the level
in zone 2.
MAXMICLVL is the maximum microphone level. If the microphone level is adjusted above the maximum, it will be
changed to the maximum value.
SELECT is the source selecon. The source selecon in both zones is always the same, so its never needed to
specify the zone
Equalizer
Also the equalizer sengs are the same for both zones.
EQBASS sets the level of the bass.
EQTREB sets the level of the treble.
The value must be between -14 and 14 in steps of 2. If a dierent value is used, it will get changed to the closest
match.
Configuration Settings
AUTOLD is Auto Loudness and this is only acve in Stereo mode. It will adjust the equalizer depending of the
volume seng. If the auto loudness is on, the sound will sll be more “rich” at low levels.
PAGACT is paging acve. If set on, the microphone will only be on when there is a contact between pin A or B and
the ground of the connector at the backside of the amplier (see user manual). In that case, the music will be
muted as well. The Concept 1 will also send ”PAGING (ZONEx) ON/OFF<CR>” when the contacts are closed/opened
so the user can know the status.
IPGAIN is input gain. Each source input has its own gain seng so the source (A, B, C or D) needs to be specied.
The value can be between -20 and 14 in steps of 2. If an invalid value is used or no source is specied, “ERROR:
Value Invalid!<CR>” will be replied. Otherwise, the reply will be “Command Exicuted!<CR>”
ZONESPLIT is only used in MULTIZONE mode. Default, the zone split value is o, which means that le and right of
the sources will be mono summed in MULTIZONE mode. Some users would like to have a dierent music in each
zone by plugging dierent sources for le and right. By seng ZONESPLIT on, the le input will be sent to zone1
and right input to zone 2, like in stereo mode. This way, it’s possible to have dierent music in each zone but please
note that the source select will always impact both zones. The ZONESPLIT feature is implemented starng from
V1.0.2
3

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Apart-Concept-1

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Apart Concept 1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Apart Concept 1 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Apart Concept 1

Apart Concept 1 Gebruiksaanwijzing - English - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info