761901
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
INTRODUCTION
M50 is Amplicomms’s new smartphone for seniors, offering an amplified
handsfree base. Its many features include:
1 - Easy-to-use interface, with two modes to choose from (Simple and light Android)
2 - Text <=>Speech support for messages, dialling, etc
3 - SOS button
4 - Base: desk top easy-charging base and Bluetooth handsfree device
A- SMARTPHONE DESCRIPTION
1 - Turn ON/OFF the screen;
Power ON/OFF ( Long press )
2 - Volume up key
3 - Volume down key
4 - Front camera
5 - Receiver
6 - Touch screen
7 - Task manager key (Android mode)
8 - Home key
9 - Back key
B- BASE DESCRIPTION
PACKAGE CONTENT
1. M50 smartphone
2. Base
3. Power adaptor with USB cable
4. Instructions manual
GET STARTED
Insert the SIM card (required) and the memory card (optional)
- With the SIM card golden contacts facing down, insert the SIM card into one
of the available slots until it stops as illustrated
- To expand the internal storage memory, you can insert a microSD memory
card (maximum capacity of 64 GB / not included). Insert the memory card into
the slot until it stops as illustrated
Note: Both card slots (SIM1=Micro, SIM2=Micro) support LTE (4G). If nano SIM card is
used, a SIM card adaptor is required ( provided by operator )
ATTENTION:
Risk of swallowing small objects! The SIM card & memory card can be removed.
Small children can swallow them
Do not bend or scratch the SIM card. Prevent any contact with water, dirt, or
electrical charges
Turn off the phone and disconnect the charger before removing the battery cover
Insert the battery
- Insert the battery into battery compartment with golden contacts of the
battery pointing to the top right of the phone
- Press lightly on the bottom end of the battery until it snaps into place
Replace the battery cover
Replace and secure the battery cover until it clicks into place
5. Battery
6. Battery cover
7. Earphones
8. Lanyard
Charging your phone / using the base speaker
- Place the base on a flat surface. Plug provided USB cable to the base and to a
wall mains socket.
- To charge your phone, simply place it on the charger as depicted. M50 can
also be charged as a regular smartphone by plugging the USB cable directly
on the USB connector (Figure A, 12)
- When placed on the cradle, your phone will connect with the base via
Bluetooth. You can answer handsfree calls or listen to music on the base
loudspeaker.
(**A valid Bluetooth pairing between M50 and base is required; your system
has been paired at the factory. In case of need, see “PAIRING M50 WITH THE
SMART BASE”)
ATTENTION:
Only use battery, charger and accessories that have been approved for using
with this model. Connecting other accessories may be dangerous and may
invalidate the warranty.
Getting started guide
**Please read this “Getting Started guide” CAREFULLY before start using your
Amplicomms M50.
**Google account is required for your phone to receive software updates. Please sign
in during phone set up or later.
1. Long press ON/OFF button ( 1 in the figure A ) to power up the phone
2. The display will be lighted up
3. Enter the SIM PIN code (Optional : Service provider dependent)
4. Select the desired language
5. Follow the setup wizard steps on the screen
6. When completed, swipe with your finger on the touch screen and press Select Home
icon on page 2, to choose between Simple Smartphone and light Android modes
Simple Smartphone mode offers an extremely easy to use
interface, specifically designed for senior users. Check next
chapter to learn about phone operation in this mode.
Light Android mode presents the user with a simplified
version of a regular smartphone. If you chose this mode,
please read “USING YOUR M50 IN LIGHT ANDROID MODE”.
USING M50 IN SIMPLE SMARTPHONE MODE
When Simple smartphone mode is selected, your M50 will look simpler and easier
to use than a regular smartphone.
Setup Wizard
The first time you select Simple Smartphone mode, you will have the choice to
be guided along the most relevant settings by a Setup Wizard. These are:
a. Click Duration (sets click duration for alphanumeric keyboard and other keys**)
b. Wifi setup (if Wifi internet access is available)
c. Google Account
d. Copy Contacts
e. New Contacts
f. SOS and Support
g. Speed Dial
h. Favorite Contacts
i. WhatsApp
j. Advanced Settings
k. Exit Setup
Once you “Exit Setup”, the wizard is always available under Settings.
** Note all touch-screen clicks are by default long click when using Simple Smartphone
mode. A valid key press should have a confirmation vibration.
Click duration can be changed anytime through the wizard or in Advanced Settings.
Home Screen
1 - Silent / Vibrate only / Normal mode
2 - One Touch Speed Dials
3 - Calls Center
4 - Message Center - SMS, missed calls, WhatsApp, etc.
5 - Pictures Center - View photos and videos, use the camera
6 - Other functions such as Whatsapp, phonebook, applications, settings, etc
7 - Battery level
Turn the Phone ON/OFF
- Long press ON/OFF button (1 in the figure A)
- The display will be lighted up. (To turn off the phone: Power Off > Turn off)
Call from the 3 One-Touch speed dials
- Press one of the 3 One-Touch speed dials directly (2 in the figure)
- Press to end the call
Make a call
- Press Call > Dial number > Enter the number 0......9 (Press Del to delete)
- Press to dial
- Press to end the call
Call from phonebook
- Press Call > to search and select the number OR
- Press Call > Search > enter the 1st character of the contact > Search > select
the number
- Press to dial
- Press to end the call
Call Log
- Press Call > Call Log or Phonebook > Call Log to view the call log
- To call back the incoming call number, press the number
Receive a call
- Press to answer
- Press to end the call
- When the phone is on the base, you can use button to answer and end the
call in handsfree mode. You can also control the base loudspeaker volume
with and keys.
Adjust the earpiece loudness
- During a call, press Volume up/Volume down keys - to adjust the loudness
Ringer mode
- In idle mode, press > select the ringer mode between Sound / Silent / Vibrate
Message
- All types of messages (SMS, WhatsApp, missed call, etc...) are consolidated in
Message
- When there is a new message, the button will be highlighted with
a new indication
- To read the message, press on the new items to read the details or press
Read old message......
Write new message
- Message > Write a new message
- Input the sending number by Dial number > Next OR
- Select from existing phonebook with
- Input from Keyboard > Send OR
- Select the pre-defined simple message by Next
Pictures
- Pictures > View Pictures > move to the next......
(Press All images to see all pictures > / to scroll throught them)
Camera
- Pictures > Take a picture > Camera > Capture to take photo or Record to take video
- Remeber to Save or Save and Send the photo......
Phone Book
Options in this menu:
1. View
2. Edit
3. New Contact
4. Call Log
ADD New contact
- Phone Book > New Contact (or Settings > Contacts > New)
- Name > input the name > Next
- Number > input the number > Next......
- Save
- You will be asked if you wish to Add a photo from Images or from Camera.
Press Yes or No and follow the instructions on the screen
EDIT Contact
- Phone Book > Edit (or Settings > Contact > Update)
- Select a contact for editing
- Name > Edit the name > Next
- Number > Edit the number > Next......
- Save (To associate a photo to a contact, go to Settings > Contacts > Photo)
Settings
- Settings > ......
- Under the Settings menu, the following options can also be accessed:
1. Contacts
2. Speed Dial
3. Language
4. Advanced Settings
5. Setup Wizard
6. Premium Service
Edit the 3 One-Touch Speed Dial buttons
- Settings > Speed Dial
- Select the empty button
- Choose the number from contact list ( to next page)
- Add contact to list (Add speed dial photo...... Go to Settings > Contacts > Photo)
Add new contact to Favorite contacts in CALL button
- Settings > Contacts > Favorite
- Select the empty button
- Choose the number from contact list ( to next page)
- Add contact to list (Favorite contacts can be selected by pressing Call)
Click duration
Long press duration for menu buttons and text keyboard can be adjusted to be
faster or slower: Settings > Setup Wizard > Click Duration
Advanced Settings
- Settings > Advanced Settings
- Under the Advanced Settings menu, the following options can also be accessed:
1. Initial setting
2. Contacts
3. Personal Info
4. SOS and Support
5. Android settings
- Ringer melody and Volume
- Wifi
6. Medication Reminder
7. Display & Sound settings
8. .....
Talking Dialling Digits
- While pressing the numeric buttons, M50 will announce the corresponding
number (except when in silent mode)
(To disable this feature, go to Advanced Settings menu > Display & Sound
Settings > Sound Settings......)
SOS Assistance button
- Long press SOS button (Fig. A, 17) for 3 seconds to dial out assistance numbers
- M50 will enter handsfree mode automatically
- In parallel, an SMS with geolocation information will be sent to the recipient of this
assistance call and up to other 5 recipients. (To stop the SOS action: Long press CANCEL)
Set SOS number
Make sure the desired phone number exists in the phonebook.
- Settings > Advanced Settings > SOS and Support > SOS number > Select the
numbers...... Save
- An SMS will be sent to the selected numbers to inform them
ATTENTION:
Remember to set the SOS number and inform the recipient
To have SOS function working normally, the network service must be active
Sending SMS may require additional cost!
Torch
To switch on/off the flashlight, slide up or down the torch switch (Fig. A,10)
located on the left-hand side of the phone.
USING YOUR M50 IN LIGHT ANDROID MODE
When light Android mode is selected, your M50 will show a simplified smartphone
interface, with large icons and easy-to-navigate pages.
1 - Google search
2 - Messages
3 - Chrome
4 - Apps area, swipe right/left for more pages
5 - Notification area, drag down to see more details or open configuration
Make a call
Tap on Phone icon on the applications menu
Click on the dial pad icon at the bottom of the screen
Enter the phone number and then click the dial key
Press and hold 0 key if you need to add a (+) sign for international calls prefix
(See Contacts section to dial phonebook entries)
While on communication you can use the icons to activate handsfree, mute,
get the keypad to dial an extension or add another call
To end the call, press on
1 7
2
3
4
5
6
1
23
5
4
10 - Torch sliding switch
11 - Charging contacts
12 - USB connector
13 - Flashlight LED
14 - Headset jack
15 - Main camera
16 - Flash
17 - SOS button
18 - Speaker
19 - Lanyard hole
1
10 2
3
9
12
11
4
7
5
6
8
13
15
16
17
18 19
14
1 - Charging cradle and contacts
2 - Phone button (answer incoming call
when smartphone on the base)
3 - Volume + key
4 - Volume - key
5 - Usb connector (at the back)
5
2
3 4
1
Instructions Manual
M50
1
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Amplicomms-M50

Zoeken resetten

  • De tekst in het scherm wordt steeds minder, minder zichtbaar dus. Is hier iets aan te doen in instellingen?? Gesteld op 30-4-2024 om 17:39

    Reageer op deze vraag Misbruik melden
  • Bellen van en naar het buitenland is ingesteld voor de M50 door de provider.
    Roaming moet je zelf op je telefoon instellen. Maar hoe die je dat? Gesteld op 24-6-2023 om 14:30

    Reageer op deze vraag Misbruik melden
  • De telefoon is op veilige modus ingeschakeld. Hetzelfde als vliegstuigstand? Hoe raak ik die modus kwijt? Gesteld op 4-3-2023 om 19:31

    Reageer op deze vraag Misbruik melden
  • Hoe kan ik de beveiligde modus (vliegtuigstan) uitschakelen? Gesteld op 4-3-2023 om 16:31

    Reageer op deze vraag Misbruik melden
  • Berichten (whatsapp, sms etc) verschijnen niet meer in 'berichten'.
    Kan ik dat veranderen in geavanceerde instellingen? Gesteld op 26-2-2023 om 22:01

    Reageer op deze vraag Misbruik melden
  • Hoe stel ik het geluid als ik gebeld wordvan een amplicomms m 50 senioren op zijn luidst Gesteld op 13-2-2023 om 19:55

    Reageer op deze vraag Misbruik melden
  • 6
  • Ik heb dit toestel voor mijn moeder gekocht,ziet er heel gemakkelijk uit…echter bij ontvangst van sms is er geen signaal.Bij whatsup is er ook een probleem met melding dat het juiste uur niet weergegeven is.Bij de sosknop heb ik mijn nummer ingestoken en als we erop duwen krijg ik geen melding.Hopelijk kan u mij daarbij helpen.Alvast bedankt op voorhand mvg Ilse Gesteld op 8-6-2022 om 20:59

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Amplicomms M50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Amplicomms M50 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Amplicomms M50

Amplicomms M50 Gebruiksaanwijzing - Nederlands - 2 pagina's

Amplicomms M50 Gebruiksaanwijzing - Deutsch - 2 pagina's

Amplicomms M50 Gebruiksaanwijzing - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info