792117
3
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
User`s Manual
4 / 25
2.
B
UTTONS AND
I
NDICATORS
1. LNB Input: Signal input port for DVB-S. Connects directly to LNB using coaxial cable.
2. Antenna Input: Signal input port for DVB-T and DVB-C. Connect directly to Antenna using
coaxial cable.
3. Charge Light:
Red: the battery is being charged.
Blue: the battery is full.
4. Warn Light: Flash if LNB is short connected
5. Working Light: Green: the meter is in working status
,2
,3
,5
,6
,4
,7
○,10
,9
,8
,12
,11
,1
,13
3
2
13
3
5
7
9
8
11
2. BUTTONS AND INDICATORS
1. LNB Input: Signal input port for DVB-S. Connects directly to LNB using coaxial cable.
2. Antenna Input: Signal input port for DVB-T and DVB-C. Connect directly to Antenna using coaxial cable.
3. Charge Light: Red: the battery is being charged.
Blue: the battery is full.
4. Warn Light: Flash if LNB is short connected
5. Working Light: Green: the meter is in working status
6. Function Keys: F1: Turn on/off the screen display
F2: Enable/disable deep when pressing keys
F3: Enter to TP control menu in Satellite Measure menu
F4: Enter to Auto DiSEqC function in Satellite Measure menu
Note: Press
User`s Manual
5 / 25
6. Function Keys:
F1: Turn on/off the screen display
F2: Enable/disable deep when pressing keys
F3: Enter to TP control menu in Satellite Measure menu
F4: Enter to Auto DiSEqC function in Satellite Measure menu
Note: Press to display help bar on menus to get more information.
7. Navigation Keys:
/
: Move focus or change value.
/: Move focus or change value
8. MENU: Go into main menu or exit from the current menu
9. OK: Confirm
10 . : 1. Turn the meter on/off, press and hold for 2 seconds to power on
the meter.
2. Press to show help bar on each menu.
11. Charging: Connect with the charger cord for charging the equipment.
12. Reset: Reset the meter
13. Screen Display: Show menus and parameters.
3.
H
OW TO MEASURE
Power on the meter, select the system to measure or select system setting to set parameters for the
device in the HOME menu.
In all menus, press [/] button to navigate, press [/] button to change the value of focused
item, press [OK] button to confirm your select, edit value or enter a list to select a wanted item, press
[MENU] button to enter or exit menus.
How to measure satellite signal:
1. Connect the signal cable to F-Type, Female jack.
2. Enter Satellite submenu.
3. Calculate the elevation and azimuth according to your local position in Calculate Angels
menu. Set or adjust your dish to the right position.
4. Set the LNB parameters according to your field environment in LNB Setting menu. Make
sure all the things are correct.
5. Enter to Satellite Measure menu, select the correct satellite and a normal transponder to
check the signal is locked or not.
According to all the output values, such as strength, quality, CNR and power level, you can accurate
your dish to get the best quality signal. And also you can analyzer the signal in Spectrum Chart menu
to display help bar on menus to get more information.
7.
Navigation Keys
:
/
: Move focus or change value.
▼/
: Move focus or change value
8. MENU: Go into main menu or exit from the current menu
9. OK: Confirm
10.
User`s Manual
5 / 25
6. Function Keys:
F1: Turn on/off the screen display
F2: Enable/disable deep when pressing keys
F3: Enter to TP control menu in Satellite Measure menu
F4: Enter to Auto DiSEqC function in Satellite Measure menu
Note: Press to display help bar on menus to get more information.
7. Navigation Keys:
/
: Move focus or change value.
/: Move focus or change value
8. MENU: Go into main menu or exit from the current menu
9. OK: Confirm
10 . : 1. Turn the meter on/off, press and hold for 2 seconds to power on
the meter.
2. Press to show help bar on each menu.
11. Charging: Connect with the charger cord for charging the equipment.
12. Reset: Reset the meter
13. Screen Display: Show menus and parameters.
3.
H
OW TO MEASURE
Power on the meter, select the system to measure or select system setting to set parameters for the
device in the HOME menu.
In all menus, press [/] button to navigate, press [/] button to change the value of focused
item, press [OK] button to confirm your select, edit value or enter a list to select a wanted item, press
[MENU] button to enter or exit menus.
How to measure satellite signal:
1. Connect the signal cable to F-Type, Female jack.
2. Enter Satellite submenu.
3. Calculate the elevation and azimuth according to your local position in Calculate Angels
menu. Set or adjust your dish to the right position.
4. Set the LNB parameters according to your field environment in LNB Setting menu. Make
sure all the things are correct.
5. Enter to Satellite Measure menu, select the correct satellite and a normal transponder to
check the signal is locked or not.
According to all the output values, such as strength, quality, CNR and power level, you can accurate
your dish to get the best quality signal. And also you can analyzer the signal in Spectrum Chart menu
: 1. Turn the meter on/off, press and hold for 2 seconds to power on the meter.
2. Press to show help bar on each menu.
11. Charging: Connect with the charger cord for charging the equipment.
12. Reset: Reset the meter
13. Screen Display: Show menus and parameters.
1
4
6
10
12
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Amiko TSC-1000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Amiko TSC-1000 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info