541724
6
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
6. Breaker
This breaker is used to protect the unit in replacement of fuse. Press it to reset.
7. AC Inlet
This connector is meant for the connection of the supplied main cord. Do not insert the power cord into this
unit until voltage has been correctly set. Do not plug the power cord into the mains until the voltage has been
correctly set.
8. Output Connectors
The Output Connectors include the Speak-on jacks and Binding post terminals, you can use the specific Output
connectors according to the actual application circumstance.
Be careful to connect the Output Connectors so as not to occur any problem.
Caution: Turn off the unit before connecting the Output Connectors so as to avoid any electric shock!
9. Balanced Input Connectors
The Input Connectors include the balanced XLR servo connectors and 1/4" TRS phone jack. For the extension
to another amplifier, connect these jacks to another amplifier input jacks.
4. Level controls for CHANNEL A, B
These level Controls are used to adjust the output signal level, you'd better adjust them properly to avoid any distortion.
5. Protection LED
This red LED indicator lights up when the thermal-protection system is working, no signal is output during this protec-
tion period, and this means any overheating occurs inside the unit (the critical temperature is 80), you must take
actions to avoid this overheating, e.g.: speed up the air circulation, decrease the signal level. If the problem is corrected,
the protection systems deactivate automatically, this LED eliminates, and normal amplifier operation is resumed .
3.2 The Rear Panel
While on, the clip limit function specific to this machine keeps fixed output when the output exceeds the Max-
imum of the machine to protect its circuits. While off, there is no such limit.
10. Clip Limit Switch
The MACRO 830/1400/2400 Professional Stereo Amplifier presents three operating modes:
In this mode, Channel A and Channel B operate independently (as a conventional stereo amplifier).
The Channel A input signal will be output from the Channel A output connectors, and the Channel B input signal
will be output from the Channel B output connectors.
- Parallel Mono Mode
In this mode, the Channel A input signal will be output from the output connectors of both Channels, detail wiring diagram
you can refer to Chapter 5.
In this mode, the Channel A input signal will be output from the Bridge output connectors, detail wiring diagram you
can refer to Chapter 5.
11. Mode Selector
- Bridged Mode
- Stereo Mode
Some large subsonic frequencies are present in the input signal and these can damage the consequent
12. LF 30Hz Filter
11
89 10 13
6
12 7
INPUT
CONNECTION
12
3
(+)
(GND)
BREAKER
BRIDGED
MONO
CHANNEL A CHANNEL B
CH-B
CH-A
BRIDGED INPUT
LINE
BALANCED
INPUT
OFF
LF 30HZ
FILTER
LINE
ON
OFF ON
CLIP LIMIT
BRIDGED
STEREO
PARALLEL
(MONO)
1.15V/20KΩ
( )
SRT
T(+)
R( )
S(GND)
SERIAL
MODEL
WARNING
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
SEE INSTRUCTION BEFORE
USING!
2
1
3
2
1
3
5
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alto Professional MACRO 1400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alto Professional MACRO 1400 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info