Connecting piece
The connection between the stove and chimney must be wel sealed without
hindering the smoke or making it difficult to sweep the chimney.
Air supply
There must be a sufficient supply of air in the room in which the stove is
located so that the burning process is not affected. In a well-insulated
house or a house with mechanical ventilation, an opening must be made to
the outside in order to guarantee the supply of air.
Base
Position the stove on a stable surface which is able to bear the weight of
the stove. The floor material must be non-flammable. If this is not the case,
it is recommended a steel or glass floor plate be used. This floor plate must
be large enough to meet the local regulations. See figure A.
Distance to walls, furniture and other materials
Observe the minimum distance to walls as shown in figure A.
- The distance between the rear of the heater and the wall must be at
least 35 cm. A smaller distance is not possible because of the heat
convection and the air supply.
- There is a safety distance of 2 meters for inflammable materials that
are in range of the heat radiation from the window.
- The safety distance for inflammable materials and furniture outside the
range of the heat radiation from the window is 80 cm.
Checking the separate parts
Before using for the first time, check whether all the separate parts in
the stove are in the correct position and the stove isn’t damaged.
