541391
65
Verklein
Vergroot
Pagina terug
1/67
Pagina verder
AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router User Manual 55
Chapter 7: Troubleshooting
Why Can I Not Access Setting Page with a Cable
Connection
Rechecking your physical connections. Make sure that power cable and RJ-45 cables are inserted tightly
and LED lights up correctly. If LED does not light up properly, try to swap RJ-45 cables.
If your client has a valid IP address, you can use “ping” to verify network connectivity. Run a command
window from the client’s PC’s start menu and ping your router’s LAN IP address (such as 192.168.1.1).
If pinging your router repeatedly timeout, you should try one of the following:
) Check your PC’s Network Connections in Control Panel.
) Reset the router and configure again.
My Laptop Cannot Find Wi-Fi Signal
Checking router’s Wireless LED lights up correctly. If LED does not light up properly, try to configure
the router via setting page.
Verify the client’s wireless adapter is installed and working properly. On a Windows client, check your
wireless connection from the Network Connections panels and make sure that its status is “Enabled”. If
the adapter is not listed, please check if the adapter is plug-in well and installed the driver. If the adapter
is listed but can not enable the connection, please check the Properties panel to make sure no resource
conflicts.
The Wireless Router Cannot Connect to the Internet
Correctly
If the AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router cannot connect to the Internet
correctly, check the following:
Make sure that your ISP provides service to you.
Rechecking your physical connections. Make sure that a RJ-45 cable connects WAN port on the router
and modem firmly.
Make sure that the router has a correct setting corresponds to your Internet type. If not, configure the
router again via setting page.
Resetting Factory Default Configuration
If you are experiencing problems with the AT-WR2304N and have tried all other troubleshooting measures,
use the Reset Configuration function. This will restore factory defaults and clear all settings, including
settings such as wireless settings.
Hold in the Reset button until the Power LED turns on to restore the factory default settings.
65

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allied Telesis AT-WR2304N bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allied Telesis AT-WR2304N in de taal/talen: Engels als bijlage per email.

De handleiding is 6,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info