541378
28
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
28 WZ20S User Guide
Broadcast Installation
The WZ20S provides an affordable yet professional broadcast console for
community, hospital and other small radio stations. It offers broadcast specific
features without the huge cost of dedicated broadcast consoles.
Mono Inputs Plug in the presenter and guest microphones. These can also
be used as telephone channels fed from suitable hybrid units. Select the PAD
switch for any line level sources.
Stereo inputs The 8 channels provide plenty of inputs for sources such as CD,
record players, jingle playback, media players, outside broadcast and so on.
The RIAA card can be fitted for direct connection to record turntables.
External monitor sources Use the EXT inputs as additional monitor sources
such as off-air and recording returns. Make sure that the tamperproof routing
switches are in their up position. This lets you select the source for monitoring
but prevents it routing back into the mix.
Stereo outputs MIX1 typically provides the stereo broadcast feed. MIX2 can
provide a second independent stereo feed. Both have dedicated metering,
inserts for processors such as limiters or EQ, and balanced XLR connections.
The additional MIX2 TRS jacks can be connected to a 2-track machine for
broadcast or production recording. This is ideal if you use the same console for
both the preparation and broadcast of the program.
Mono output Alternatively, use MIX2 as a dedicated mono feed, for example
simultaneous stereo and mono broadcast or recording. If an independent mono
mix is not required, the mono output can follow the stereo output by selecting
the tamperproof subgroup switch above the MIX1 fader and deselecting all
channel MIX2 routing switches.
Aux sends The 6 AUX sends provide ample additional feeds. Set pre-fade for
cue sends, and post-fade for sends to effects processors such as reverb and
echo. The processed (wet) reverb signal can be returned to the mix through a
stereo channel. The dual inputs allow two units to be returned through one
stereo channel, providing single fader control of two effects.
Cleanfeed Otherwise known as ‘mix minus’ this is a cue feed sent to the
telephone caller or outside broadcast unit. Use an AUX mix with channels set
post-fade. Set all the send levels except the caller channel to the ‘0’ position.
Make sure the caller channel is turned off. This prevents the callers own voice
returning to the telephone and causing feedback. You could press the PRE
switch so that the caller can be spoken to and prepared before the presenter
goes on-air.
Monitoring Two headphone outputs are provided to feed both the presenter
and guest. Alternatively, feed the guest system from the local monitor output
with PFL disabled to allow presenter only cueing. Headphones and local monitor
have independent level control. The local monitor could be used to drive a studio
speaker system. Press DIM to mute (or alternatively attenuate) the speakers,
important when the presenter is on-air. Any signal can be monitored by
selecting one of the nine source selectors or a channel PFL. Use SPLIT PFL to
cue a source while keeping an ear on the broadcast program. Check mono
compatibility of the broadcast signal by pressing MONO.
Customisation There is a host of internal options which can be fitted or
reconfigured to meet the exact requirements of a particular installation. These
include fitting switched faders for remote start of jingle, music players, and on-air
lamps, and automatic muting of the local monitor, for example wired to the
presenter mic channel fader, ON or PFL switches. A 25 pin REMOTE user
connector can be fitted and custom wired as required. Note that all internal
WZ20S reconfiguration and fitting of options should be referred to competent
technical personnel only.
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allen-Heath MixWizard Series WZ20S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allen-Heath MixWizard Series WZ20S in de taal/talen: Engels als bijlage per email.

De handleiding is 4,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info