541389
13
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
GL2
ON-STAGE MONITOR
mic
splitter
2
1
34
5
6
AMPLIFIERS
EFFECT
insert
inserts
down
down
POST
POST
Graphic equalisers plugged into the console inserts are an invaluable aid to reducing
on-stage acoustic feedback and enhancing the clarity of the monitors. Using the
inserts allows the stage engineer to check the operation of the equalisers in his wedge
monitor. It is best to use the same type of loudspeaker for the engineers monitor as
the stage monitors.
Set up the WEDGE MIX by selecting one
or a combination of the group/L/R AFL
(monitor 1 to 6) switches to listen to the
desired stage monitor outputs. These are
post insert (post graphic EQ) and post
output fader for accurate monitoring.
Pressing any PFL switch automatically
overrides the selected AFL source to allow
channel setup and signal checking.
ENGINEERS WEDGE MONITOR
STAGE MONITORS
Set the MONITOR MODE
switch to the down position
(below panel) for the wedge
monitor output (AFL
interrupted by PFL).
These switches are recessed
to avoid accidental
operation. Set using a pen
tip or pointed object.
Set the REV switches to
the down position to route
the aux mix through the
main outputs to provide the
stage monitor sends.
to FOH
console
EQUALISERS
On-stage mixing system for local control of performers monitor loudspeakers (wedges)
With dedicated output for the stage engineers wedge loudspeaker.
This example shows the 6 aux sends routed
through the main outputs to provide 6 inde-
pendent stage monitor mixes with metering,
mutes, AFL, inserts and balanced XLR connec-
tors.
The REV switches reroute the groups and L-R
mix to the aux jack outputs for additional moni-
tor or effects sends, or as an independent submix
facility. For example the aux 5 and 6 jack
outputs may provide a separate stereo mix out-
put fed from the channel L-R switches and the
additional 4 return line inputs.
To add effects such as delay or ADT to the stage
monitors the signal/s may be routed to a group
(available at the aux jack output), using the
master LEV to control the send level, and
returning the effect to an unused channel using
the aux send controls to set the required amount
of effect to each monitor.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Allen-Heath GL-2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Allen-Heath GL-2 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info